RigPlan

LED wall manufacturers compared

18 makers · 230 panels · every figure from the maker's own datasheet

One row per maker, built from the panels in the database: how many are listed, the pitch range, the cabinet formats, and the spread of weight and maximum draw per square metre. A maker's page carries each of its panels; the pages further down put two makers' matched panels side by side.

MakerPanelsPitch (mm)Cabinets (mm)kg/m²W/m² maxNitsHang limit published
Absen430.938 to 8.9250×500, 600×337.5, 500×500, 500×1000, 1000×500, 1000×100019 to 38400 to 8001,000 to 5,50028 of 43
INFiLED271.56 to 8.33500×500, 500×1000, 1200×600, 1000×1000, 1200×120011 to 52458 to 720800 to 5,0007 of 27
ROE Visual191.56 to 8.9500×500, 500×1000, 600×1200, 1000×10009 to 37420 to 960800 to 6,00019 of 19
Desay181.25 to 16.667500×500, 800×90022 to 44531 to 760600 to 5,0000 of 18
Gloshine181.95 to 8.93500×500, 1000×50013 to 29360 to 720800 to 4,00018 of 18
Sharp170.9 to 7.8600×337.5, 608×342, 500×50021 to 42168 to 720600 to 5,5000 of 17
Esdlumen (LianTronics)131.5 to 3.9500×50032 to 35480 to 752900 to 5,00013 of 13
Planar121.9 to 5.2500×500, 500×100014 to 17600 to 1,200800 to 1,5000 of 12
Unilumin110.95 to 2.6609.92×343.08, 500×50031 to 36382 to 717600 to 1,00010 of 11
PixelFLEX101.2 to 10608×342, 500×500, 960×96030 to 40452 to 1,200600 to 10,0000 of 10
YES TECH91.9 to 5.9500×500, 1000×50016 to 26420 to 7001,000 to 5,5000 of 9
Glux81.563 to 15.6250×250, 500×500, 1000×50010 to 34600 to 1,200700 to 6,0000 of 8
Leyard81.5 to 7.8500×50016 to 20600 to 1,2001,000 to 6,0000 of 8
ADJ72.97 to 6500×500, 576×57627 to 36633 to 9041,000 to 4,5007 of 7
Barco41.2 to 1.92400×450, 609.92×343.0836 to 37650 to 917600 to 1,0000 of 4
LG31.25 to 2.5600×337.526494 to 7418000 of 3
Chauvet Professional22.9 to 4.8500×100026 to 27514 to 6661,200 to 1,5002 of 2
Samsung11.5480×540227728000 of 1

A datasheet does not say the price, the lead time, the service or the state of a rental fleet, and neither does this table. Where a maker publishes no typical draw, the planner estimates it as a third of the maximum and marks it; where no hang limit is published, it uses a conservative placeholder and says so on the panel page.

Maker against maker

A page for every two makers whose lineups overlap on at least 3 panels of comparable pitch: the matched panels side by side, weight and power per square metre, cabinet formats and what each maker publishes.

For two specific panels, the panel comparison takes any of the 230, up to four at once, at your wall size.