5 matched panels · 1.953 to 2.5 mm · specifications from both makers' datasheets
The two lineups side by side, then what the matched panels say about weight, power and what each maker publishes. Every figure is the maker's own; the planner adds nothing it cannot point to on a sheet.
Absen
LEDitgo
Panels listed
57
24
Pitch range
0.78 to 8.9 mm
1.292 to 10.417 mm
Cabinet formats
250×500, 240×540, 600×337.5, 500×500, 500×1000, 1000×500, 960×540, 1000×1000 mm
480×480, 496×496, 500×500, 500×1000, 800×900 mm
Weight
19 to 38 kg/m²
22 to 47 kg/m²
Maximum draw
326 to 800 W/m²
520 to 1,200 W/m²
Brightness
800 to 5,500 nits
800 to 6,000 nits
Hang limit published
42 of 57
0 of 24
Typical draw published
57 of 57
24 of 24
Weight and draw are per square metre of cabinet, so different cabinet sizes compare fairly. Ranges run across every panel the maker has in the database, not only the matched ones.
What the sheets say
Absen and LEDitgo overlap on 5 matched pairs between 1.953 and 2.5 mm; outside that band one of them has no comparable panel.
Absen is the lighter cabinet in 5 of 5 matched pairs, LEDitgo in -1, and 1 is within 5%. Across their lineups that is 19 to 38 kg/m² against 22 to 47 kg/m².
Absen draws less at full white in 4 of 5 matched pairs, LEDitgo in -1, and 2 are within 5%. Lineups: 326 to 800 W/m² against 520 to 1,200 W/m², which sets the circuit count.
Cabinet formats: Absen builds in 250×500, 240×540, 600×337.5, 500×500, 500×1000, 1000×500, 960×540, 1000×1000 mm; LEDitgo in 480×480, 496×496, 500×500, 500×1000, 800×900 mm. A shop that already owns one format keeps its bumpers and cases.
A hanging limit is published for 42 of its 57 panels by Absen and for none of its 24 panels by LEDitgo; where it is not, the planner uses a conservative placeholder and says so.
Both publish a typical draw for every panel here, so the typical kilowatt figure rests on the sheets, not on an estimate.
Matched panels, side by side
Each pair is two panels of comparable pitch, one from each maker, with the same wall built from both.