3 matched panels · 1.9 to 2.52 mm · specifications from both makers' datasheets
The two lineups side by side, then what the matched panels say about weight, power and what each maker publishes. Every figure is the maker's own; the planner adds nothing it cannot point to on a sheet.
Planar
SiliconCore
Panels listed
39
10
Pitch range
0.945 to 5.2 mm
0.95 to 5.208 mm
Cabinet formats
604.8×340.2, 500×500, 604.8×680.4, 500×1000 mm
480×270, 608×342, 500×500 mm
Weight
14 to 34 kg/m²
36 to 56 kg/m²
Maximum draw
321 to 1,200 W/m²
476 to 856 W/m²
Brightness
500 to 2,000 nits
1,200 to 4,500 nits
Hang limit published
0 of 39
0 of 10
Typical draw published
25 of 39
10 of 10
Weight and draw are per square metre of cabinet, so different cabinet sizes compare fairly. Ranges run across every panel the maker has in the database, not only the matched ones.
What the sheets say
Planar and SiliconCore overlap on 3 matched pairs between 1.9 and 2.52 mm; outside that band one of them has no comparable panel.
Planar is the lighter cabinet in 3 of 3 matched pairs, SiliconCore in 0. Across their lineups that is 14 to 34 kg/m² against 36 to 56 kg/m².
Planar draws less at full white in 1 of 3 matched pairs, SiliconCore in 2. Lineups: 321 to 1,200 W/m² against 476 to 856 W/m², which sets the circuit count.
Cabinet formats: Planar builds in 604.8×340.2, 500×500, 604.8×680.4, 500×1000 mm; SiliconCore in 480×270, 608×342, 500×500 mm. A shop that already owns one format keeps its bumpers and cases.
A hanging limit is published for none of its 39 panels by Planar and for none of its 10 panels by SiliconCore; where it is not, the planner uses a conservative placeholder and says so.
Typical draw is estimated as a third of the maximum where a sheet publishes no figure: Planar for 14 of 39, SiliconCore for none.
Matched panels, side by side
Each pair is two panels of comparable pitch, one from each maker, with the same wall built from both.