3 matched panels · 1.953 to 10.4 mm · specifications from both makers' datasheets
The two lineups side by side, then what the matched panels say about weight, power and what each maker publishes. Every figure is the maker's own; the planner adds nothing it cannot point to on a sheet.
Glux
LEDitgo
Panels listed
8
24
Pitch range
1.563 to 15.6 mm
1.292 to 10.417 mm
Cabinet formats
250×250, 500×500, 1000×500 mm
480×480, 496×496, 500×500, 500×1000, 800×900 mm
Weight
10 to 34 kg/m²
22 to 47 kg/m²
Maximum draw
600 to 1,200 W/m²
520 to 1,200 W/m²
Brightness
700 to 6,000 nits
800 to 6,000 nits
Hang limit published
0 of 8
0 of 24
Typical draw published
8 of 8
24 of 24
Weight and draw are per square metre of cabinet, so different cabinet sizes compare fairly. Ranges run across every panel the maker has in the database, not only the matched ones.
What the sheets say
Glux and LEDitgo overlap on 3 matched pairs between 1.953 and 10.4 mm; outside that band one of them has no comparable panel.
Glux is the lighter cabinet in 3 of 3 matched pairs, LEDitgo in 0. Across their lineups that is 10 to 34 kg/m² against 22 to 47 kg/m².
Glux draws less at full white in 1 of 3 matched pairs, LEDitgo in 2. Lineups: 600 to 1,200 W/m² against 520 to 1,200 W/m², which sets the circuit count.
Cabinet formats: Glux builds in 250×250, 500×500, 1000×500 mm; LEDitgo in 480×480, 496×496, 500×500, 500×1000, 800×900 mm. A shop that already owns one format keeps its bumpers and cases.
A hanging limit is published for none of its 8 panels by Glux and for none of its 24 panels by LEDitgo; where it is not, the planner uses a conservative placeholder and says so.
Both publish a typical draw for every panel here, so the typical kilowatt figure rests on the sheets, not on an estimate.
Matched panels, side by side
Each pair is two panels of comparable pitch, one from each maker, with the same wall built from both.