Philips (PPDS) vs Unilumin
5 matched panels · 1.266 to 1.583 mm · specifications from both makers' datasheets
The two lineups side by side, then what the matched panels say about weight, power and what each maker publishes. Every figure is the maker's own; the planner adds nothing it cannot point to on a sheet.
| Philips (PPDS) | Unilumin |
|---|
| Panels listed | 20 | 18 |
| Pitch range | 0.781 to 1.9 mm | 0.95 to 16.67 mm |
| Cabinet formats | 600×337.5, 608×342 mm | 609.92×343.08, 500×500, 1200×1200 mm |
| Weight | 20 to 38 kg/m² | 24 to 49 kg/m² |
| Maximum draw | 267 to 808 W/m² | 382 to 717 W/m² |
| Brightness | 600 to 1,000 nits | 600 to 8,000 nits |
| Hang limit published | 0 of 20 | 10 of 18 |
| Typical draw published | 20 of 20 | 18 of 18 |
Weight and draw are per square metre of cabinet, so different cabinet sizes compare fairly. Ranges run across every panel the maker has in the database, not only the matched ones.
What the sheets say
- Philips (PPDS) and Unilumin overlap on 5 matched pairs between 1.266 and 1.583 mm; outside that band one of them has no comparable panel.
- Philips (PPDS) is the lighter cabinet in 3 of 5 matched pairs, Unilumin in 2. Across their lineups that is 20 to 38 kg/m² against 24 to 49 kg/m².
- Philips (PPDS) draws less at full white in 0 of 5 matched pairs, Unilumin in 5. Lineups: 267 to 808 W/m² against 382 to 717 W/m², which sets the circuit count.
- Cabinet formats: Philips (PPDS) builds in 600×337.5, 608×342 mm; Unilumin in 609.92×343.08, 500×500, 1200×1200 mm. A shop that already owns one format keeps its bumpers and cases.
- A hanging limit is published for none of its 20 panels by Philips (PPDS) and for 10 of its 18 panels by Unilumin; where it is not, the planner uses a conservative placeholder and says so.
- Both publish a typical draw for every panel here, so the typical kilowatt figure rests on the sheets, not on an estimate.
Matched panels, side by side
Each pair is two panels of comparable pitch, one from each maker, with the same wall built from both.
More