6 matched panels · 2.5 to 2.5 mm · specifications from both makers' datasheets
The two lineups side by side, then what the matched panels say about weight, power and what each maker publishes. Every figure is the maker's own; the planner adds nothing it cannot point to on a sheet.
Absen
PixelFLEX
Panels listed
57
10
Pitch range
0.78 to 8.9 mm
1.2 to 10 mm
Cabinet formats
250×500, 240×540, 600×337.5, 500×500, 500×1000, 1000×500, 960×540, 1000×1000 mm
608×342, 500×500, 960×960 mm
Weight
19 to 38 kg/m²
30 to 40 kg/m²
Maximum draw
326 to 800 W/m²
452 to 1,200 W/m²
Brightness
800 to 5,500 nits
600 to 10,000 nits
Hang limit published
42 of 57
0 of 10
Typical draw published
57 of 57
0 of 10
Weight and draw are per square metre of cabinet, so different cabinet sizes compare fairly. Ranges run across every panel the maker has in the database, not only the matched ones.
What the sheets say
Absen and PixelFLEX overlap on 6 matched pairs between 2.5 and 2.5 mm; outside that band one of them has no comparable panel.
Absen is the lighter cabinet in 3 of 6 matched pairs, PixelFLEX in 1, and 2 are within 5%. Across their lineups that is 19 to 38 kg/m² against 30 to 40 kg/m².
Absen draws less at full white in 3 of 6 matched pairs, PixelFLEX in 3. Lineups: 326 to 800 W/m² against 452 to 1,200 W/m², which sets the circuit count.
Cabinet formats: Absen builds in 250×500, 240×540, 600×337.5, 500×500, 500×1000, 1000×500, 960×540, 1000×1000 mm; PixelFLEX in 608×342, 500×500, 960×960 mm. A shop that already owns one format keeps its bumpers and cases.
A hanging limit is published for 42 of its 57 panels by Absen and for none of its 10 panels by PixelFLEX; where it is not, the planner uses a conservative placeholder and says so.
Typical draw is estimated as a third of the maximum where a sheet publishes no figure: Absen for none, PixelFLEX for 10 of 10.
Matched panels, side by side
Each pair is two panels of comparable pitch, one from each maker, with the same wall built from both.