This sheet gives the datasheet figures for the INFiLED IL-PSS-ORSP6.25, a 6.25 mm sports perimeter board in a 1600 × 956 mm cabinet. Where the maker's sheet is silent, the row says so.
| Manufacturer | INFiLED, SP series |
| Pixel pitch | 6.25 mm |
| Cabinet size | 1600 × 956 × 124 mm |
| Pixels per cabinet | 256 × 144 (36,864 px) |
| Weight | 65 kg (42 kg/m², derived) |
| Maximum power | 1,050 W per cabinet (686 W/m², derived) |
| Typical power | 350 W per cabinet (229 W/m², derived) |
| Brightness | 5,000 nits |
| Refresh rate | 3,840 Hz |
| Viewing angle (H / V) | 160° / 110° |
| Ingress protection | IP65 |
| Stand tilt | not published |
Source: INFiLED SP Series brochure (January 2024), retrieved 2026-10-07. Stadium perimeter board engineered to UEFA requirements, with power and signal redundancy, impact padding and emergency gate designs. The brochure gives the depth as 124 mm in its specification table and drawing and as 142 mm on page 2; 124 is stored. It prints the refresh rate as "≤3,840 Hz". Its 256 × 144 px at 6.25 mm fill 1600 × 900 mm of the 1600 × 956 mm cabinet.
Perimeter planning is not in the RigPlan planner yet. The planner works in one rectangle of panels, flown, stacked or wall-mounted; a perimeter run is segments of one row in a line round a field, on stands with ballast, with fibre between segments. These pages are for looking boards up and comparing them.
It is listed on the INFiLED page, among the perimeter boards from every maker in the database, and in the full panel database.