This page sets the datasheet figures of two sports perimeter boards side by side, with weight and draw per square metre worked out where a sheet prints them per cabinet or the other way round.
| INFiLED IL-PSS-ORSP6.25 | LianTronics SLG6.25 | |
|---|---|---|
| Manufacturer | INFiLED, SP series | LianTronics, SLG series |
| Pixel pitch | 6.25 mm | 6.25 mm |
| Cabinet size | 1600 × 956 × 124 mm | 2000 × 900 × 98 mm |
| Pixels per cabinet | 256 × 144 (36,864 px) | 320 × 144 (46,080 px) |
| Weight | 65 kg (42 kg/m², derived) | 29 kg/m² (52 kg per cabinet, derived) |
| Maximum power | 1,050 W per cabinet (686 W/m², derived) | 780 W/m² (1,404 W per cabinet, derived) |
| Typical power | 350 W per cabinet (229 W/m², derived) | 195 W/m² (351 W per cabinet, derived) |
| Brightness | 5,000 nits | 6,000 nits |
| Refresh rate | 3,840 Hz | 7,680 Hz |
| Viewing angle (H / V) | 160° / 110° | 160° / 120° |
| Ingress protection | IP65 | IP65 |
| Stand tilt | not published | not published |
By weight per square metre, the LianTronics SLG6.25 is the lighter board: 29 kg/m² against 42 kg/m² for the INFiLED IL-PSS-ORSP6.25, which is what the ballast and the stands carry along a run.
On typical content the LianTronics SLG6.25 draws less: 195 W/m² against 229 W/m² for the INFiLED IL-PSS-ORSP6.25.
The LianTronics SLG6.25 is rated brighter, 6,000 nits against 5,000 nits.
Perimeter planning is not in the RigPlan planner yet. The planner works in one rectangle of panels, flown, stacked or wall-mounted; a perimeter run is segments of one row in a line round a field, on stands with ballast, with fibre between segments. These pages are for looking boards up and comparing them. Every board in the database is on the perimeter boards list.