This page sets the datasheet figures of two sports perimeter boards side by side, with weight and draw per square metre worked out where a sheet prints them per cabinet or the other way round.
| INFiLED IL-PSS-ORSP6.25 | Unilumin Usport X 6 | |
|---|---|---|
| Manufacturer | INFiLED, SP series | Unilumin, Usport X series |
| Pixel pitch | 6.25 mm | 6.25 mm |
| Cabinet size | 1600 × 956 × 124 mm | 1600 × 900 × 105 mm |
| Pixels per cabinet | 256 × 144 (36,864 px) | 256 × 144 (36,864 px) |
| Weight | 65 kg (42 kg/m², derived) | 39 kg/m² (56 kg per cabinet, derived) |
| Maximum power | 1,050 W per cabinet (686 W/m², derived) | 650 W/m² (936 W per cabinet, derived) |
| Typical power | 350 W per cabinet (229 W/m², derived) | 217 W/m² (312 W per cabinet, derived) |
| Brightness | 5,000 nits | 6,000 nits |
| Refresh rate | 3,840 Hz | 7,680 Hz |
| Viewing angle (H / V) | 160° / 110° | 150° / 110° |
| Ingress protection | IP65 | IP65 |
| Stand tilt | not published | not published |
By weight per square metre, the Unilumin Usport X 6 is the lighter board: 39 kg/m² against 42 kg/m² for the INFiLED IL-PSS-ORSP6.25, which is what the ballast and the stands carry along a run.
On typical content the Unilumin Usport X 6 draws less: 217 W/m² against 229 W/m² for the INFiLED IL-PSS-ORSP6.25.
The Unilumin Usport X 6 is rated brighter, 6,000 nits against 5,000 nits.
Perimeter planning is not in the RigPlan planner yet. The planner works in one rectangle of panels, flown, stacked or wall-mounted; a perimeter run is segments of one row in a line round a field, on stands with ballast, with fibre between segments. These pages are for looking boards up and comparing them. Every board in the database is on the perimeter boards list.