This page sets the datasheet figures of two sports perimeter boards side by side, with weight and draw per square metre worked out where a sheet prints them per cabinet or the other way round.
| INFiLED IL-PSS-ORSP6.25 | Linsn LED EX1600-S P6.67 | |
|---|---|---|
| Manufacturer | INFiLED, SP series | Linsn LED, EX1600-S series |
| Pixel pitch | 6.25 mm | 6.67 mm |
| Cabinet size | 1600 × 956 × 124 mm | 1600 × 960 mm |
| Pixels per cabinet | 256 × 144 (36,864 px) | 240 × 144 (34,560 px) |
| Weight | 65 kg (42 kg/m², derived) | not published |
| Maximum power | 1,050 W per cabinet (686 W/m², derived) | 800 W/m² (1,229 W per cabinet, derived) |
| Typical power | 350 W per cabinet (229 W/m², derived) | 400 W/m² (614 W per cabinet, derived) |
| Brightness | 5,000 nits | 6,000 nits |
| Refresh rate | 3,840 Hz | 3,840 Hz |
| Viewing angle (H / V) | 160° / 110° | not published |
| Ingress protection | IP65 | IP65 |
| Stand tilt | not published | not published |
On typical content the INFiLED IL-PSS-ORSP6.25 draws less: 229 W/m² against 400 W/m² for the Linsn LED EX1600-S P6.67.
The Linsn LED EX1600-S P6.67 is rated brighter, 6,000 nits against 5,000 nits.
Perimeter planning is not in the RigPlan planner yet. The planner works in one rectangle of panels, flown, stacked or wall-mounted; a perimeter run is segments of one row in a line round a field, on stands with ballast, with fibre between segments. These pages are for looking boards up and comparing them. Every board in the database is on the perimeter boards list.