31 panels and boards · 22 source documents · last read 9 October 2026 · rigplan.app/panels/manufacturer/unilumin/review
This sheet lists every value RigPlan stores for Unilumin panels and boards, as stored, with the document each was read from and the day it was read. Write anything that disagrees with the current datasheet in the correction column and send the sheet back to erik@enrenterprises.com; corrections go live within a day.
Fixed-install 16:9 cabinet, 600 nits, rear IP50, 0.7 kg lighter than the original UpanelS. Datasheet states 20 tiles can be hung per column with a hanging beam.
Half-width trim of the 16:9 UpanelS cabinet, made as a left and a right cabinet; the manual calls it a derivative of the UpanelS-L. Wall-mounted install cabinet, front service, rear IP50, 600 nits. Manual gives 100±15 W maximum and 33±15 W typical per panel, with no unit on the ±15; the nominal figure is stored. The table prints no pitch: the model name says 0.9 and the geometry (304.96 mm ÷ 320 px) gives 0.953 mm. The manual describes wall mounting only and publishes no hanging limit, so the hang figure is a placeholder.
Half-width trim of the 16:9 UpanelS cabinet, made as a left and a right cabinet; the manual calls it a derivative of the UpanelS-L. Wall-mounted install cabinet, front service, rear IP50, 600 nits. Manual gives 90±15 W maximum and 30±15 W typical per panel, with no unit on the ±15; the nominal figure is stored. Both figures sit in one merged cell across the 1.2 and 1.5 columns and are read as applying to both, the way the same manual merges the full cabinet’s 140±15 W across 1.2, 1.5 and 1.9, which Unilumin’s UpanelS 1.2, 1.5 and 1.9 sheets give as 140 W each. The table prints no pitch: the model name says 1.2 and the geometry (304.96 mm ÷ 240 px) gives 1.271 mm. The manual describes wall mounting only and publishes no hanging limit, so the hang figure is a placeholder.
Half-width trim of the 16:9 UpanelS cabinet, made as a left and a right cabinet; the manual calls it a derivative of the UpanelS-L. Wall-mounted install cabinet, front service, rear IP50, 600 nits. Manual gives 90±15 W maximum and 30±15 W typical per panel, with no unit on the ±15; the nominal figure is stored. Both figures sit in one merged cell across the 1.2 and 1.5 columns and are read as applying to both, the way the same manual merges the full cabinet’s 140±15 W across 1.2, 1.5 and 1.9, which Unilumin’s UpanelS 1.2, 1.5 and 1.9 sheets give as 140 W each. The table prints no pitch: the model name says 1.5 and the geometry (304.96 mm ÷ 192 px) gives 1.588 mm. The manual describes wall mounting only and publishes no hanging limit, so the hang figure is a placeholder.
Indoor flexible install panel on 4-in-1 bar modules, front installation and front maintenance, IP30 front, concave and convex by the sheet. Sheet gives 125/42 W maximum and typical for the 500 × 500 mm panel (62.5/21 W for 500 × 250) and 24 kg/m² for the series; the panel weight is that times 0.25 m². No hanging limit is published, so the hang figure is a conservative placeholder.
Fixed-install 16:9 cabinet. Note: the datasheet’s pixel-density field (396,550 px/m²) does not agree with its own 320×180 resolution and cabinet size; the resolution and pitch are self-consistent and are what we use.
Half-width trim of the 16:9 UpanelS cabinet, made as a left and a right cabinet; the manual calls it a derivative of the UpanelS-L. Wall-mounted install cabinet, front service, rear IP50, 600 nits. Manual gives 90±15 W maximum and 30±15 W typical per panel, with no unit on the ±15; the nominal figure is stored. The table prints no pitch: the model name says 1.9 and the geometry (304.96 mm ÷ 160 px) gives 1.906 mm. The manual describes wall mounting only and publishes no hanging limit, so the hang figure is a placeholder.
Fixed-install 16:9 cabinet, 600 nits, rear IP50. Datasheet states 20 tiles can be hung per column with a hanging beam. This sheet’s pixel-density field (275,267 px/m²) is self-consistent, it corrects the error the original UpanelS 1.9 sheet carries.
Indoor flexible install panel on 4-in-1 bar modules, front installation and front maintenance, IP30 front, concave and convex by the sheet. Sheet gives 110/37 W maximum and typical for the 500 × 500 mm panel (55/18 W for 500 × 250) and 24 kg/m² for the series; the panel weight is that times 0.25 m². No hanging limit is published, so the hang figure is a conservative placeholder.
Half-width trim of the 16:9 UpanelS cabinet, made as a left and a right cabinet; the manual calls it a derivative of the UpanelS-L. Wall-mounted install cabinet, front service, rear IP50, 600 nits. Manual gives 60±15 W maximum and 20±15 W typical per panel, with no unit on the ±15; the nominal figure is stored. The manual heads this column Upanel12.5S, a misprint for 2.5. The table prints no pitch: the geometry (304.96 mm ÷ 120 px) gives 2.541 mm. The manual describes wall mounting only and publishes no hanging limit, so the hang figure is a placeholder.
Curve-capable rental cabinet (convex −40° to concave +40°, built for C and S shapes), 1,000 nits, indoor IP30, rear service. Unilumin publishes per-panel power directly: 160/55 W. Sheet lists hanging and stacking mounting but no count, conservative placeholder. A UpadIV-C sibling exists.
Indoor flexible install panel on 4-in-1 bar modules, front installation and front maintenance, IP30 front, concave and convex by the sheet. Sheet gives 112/37 W maximum and typical for the 500 × 500 mm panel (56/19 W for 500 × 250) and 24 kg/m² for the series; the panel weight is that times 0.25 m². No hanging limit is published, so the hang figure is a conservative placeholder.
Outdoor fixed-install cabinet, 3-in-1 SMD, IP65 front and rear, front-maintenance build: the sheet gives 34.3 kg/m² and 650/217 W/m² maximum and typical for it, and a rear-maintenance build at 29.4 kg/m² and 750/250 W/m². Fixed mounting only by the sheet, so the hang figure is a placeholder; the structure is designed for the site.
Outdoor fixed-install cabinet, 3-in-1 SMD, IP65, front-maintenance build: the sheet gives 49.4 kg/m² and 650/217 W/m² maximum and typical for it, and a rear-maintenance build at 43.8 kg/m² and 750/250 W/m². Fixed mounting only by the sheet, so the hang figure is a placeholder; the structure is designed for the site.
Outdoor fixed-install cabinet, 3-in-1 SMD, IP65 front and rear, front-maintenance build: the sheet gives 49.4 kg/m² and 650/217 W/m² maximum and typical for it, and a rear-maintenance build at 43.8 kg/m² and 750/250 W/m². Fixed mounting only by the sheet, so the hang figure is a placeholder; the structure is designed for the site.
Outdoor fixed-install cabinet, 3-in-1 SMD, IP65 front and IP54 rear, front-maintenance build: the sheet gives 49.4 kg/m² and 650/217 W/m² maximum and typical for it, and a rear-maintenance build at 43.8 kg/m² and 750/250 W/m². Fixed mounting only by the sheet, so the hang figure is a placeholder; the structure is designed for the site.
Indoor perimeter board with top service ("Indoor LED Display-Panel für Bandenanzeigen mit Top-Service"), a portrait 500 × 1000 mm cabinet as printed and drawn. The datasheet prints weight and power per m² only. The spec card prints a refresh rate of 7,680 Hz and the datasheet block 3,840 Hz; the card is stored.
Indoor perimeter board ("Indoor LED Display-Panel für Bandenanzeigen"), rear service, on a stand; no tilt angle is printed. The datasheet prints weight and power per m² only.
Outdoor perimeter board ("Outdoor LED Display-Panel für Bandenanzeigen"), rear service, on a stand 965 mm high overall with a 680 mm footprint; no tilt angle is printed. The datasheet prints weight and power per m² only.
Indoor perimeter board with top service ("Indoor LED Display-Panel für Bandenanzeigen mit Top-Service"), a portrait 500 × 1000 mm cabinet as printed and drawn. The datasheet prints weight and power per m² only. The spec card prints a refresh rate of 7,680 Hz and the datasheet block 3,840 Hz; the card is stored.
Indoor perimeter board ("Indoor LED Display-Panel für Bandenanzeigen"), rear service, on a stand; no tilt angle is printed. The datasheet prints weight and power per m² only.
Outdoor perimeter board ("Outdoor LED Display-Panel für Bandenanzeigen"), rear service, on a stand 965 mm high overall with a 680 mm footprint; no tilt angle is printed. The datasheet prints weight and power per m² only.
Outdoor perimeter board ("Outdoor LED Display-Panel für Bandenanzeigen"), rear service, on a stand 965 mm high overall with a 680 mm footprint; no tilt angle is printed. The datasheet prints weight and power per m² only.
Indoor perimeter board with top service ("Indoor LED Display-Panel für Bandenanzeigen mit Top-Service"), a portrait 500 × 1000 mm cabinet as printed and drawn. The datasheet prints weight and power per m² only. Named 10, with a printed pitch of 10.41 mm.
These Unilumin entries are on the maker page as names only, because the document RigPlan found lacked the figures named here.
Unilumin UPAD III (rental series): known 2.604 mm pitch, 500 × 500 × 90.6 mm, 192 × 192 px, 9 kg; missing Per-model power. The UPAD III manual quotes 120/40 W indoor and 240/80 or 210/70 W outdoor without saying which pitch each belongs to, so it cannot be attributed to a model with confidence.. https://www.matrixvisual.com/wp-content/uploads/2016/01/UNILUMIN-UPAD-III-2.6MM-Spec-Sheet.pdf
Unilumin USlim II 1.5 · 1.56 mm: known 500 × 250 × 39.6 mm panel at 3.2 kg and 500 × 500 mm at 5.6 kg, 800 nits, 155° / 155°, 3,840 Hz, 480/160 W/m² maximum and typical, IP50 front, front and rear service, fixed, floor-mounted or hanging; missing The pixel count per panel: the sheet’s Pixels Per Panel row is blank. The 1.8, 2.5 and 3.9 mm sheets on the same site download damaged.. https://www.unilumin-usa.com/uslimii-1-5-specification-sheet/