This sheet gives the datasheet figures for the LianTronics SLG6.25, a 6.25 mm sports perimeter board in a 2000 × 900 mm cabinet. Where the maker's sheet is silent, the row says so.
| Manufacturer | LianTronics, SLG series |
| Pixel pitch | 6.25 mm |
| Cabinet size | 2000 × 900 × 98 mm |
| Pixels per cabinet | 320 × 144 (46,080 px) |
| Weight | 29 kg/m² (52 kg per cabinet, derived) |
| Maximum power | 780 W/m² (1,404 W per cabinet, derived) |
| Typical power | 195 W/m² (351 W per cabinet, derived) |
| Brightness | 6,000 nits |
| Refresh rate | 7,680 Hz |
| Viewing angle (H / V) | 160° / 120° |
| Ingress protection | IP65 |
| Stand tilt | not published |
Source: LianTronics SLG Series brochure (EN 2025.10), retrieved 2026-10-07. UEFA-compliant perimeter board shipped on dollies the size of the cabinet, with rubber pads, soft masks, a bottom foot brace and N+1 power backup. The brochure prints weight and power per m² only. Its table gives a viewing angle of 160° / 120° where its text says 140° horizontal; the table is stored. The LianTronics regional sites print the depth as 112 mm; the brochure, stored here, prints 98 mm.
Perimeter planning is not in the RigPlan planner yet. The planner works in one rectangle of panels, flown, stacked or wall-mounted; a perimeter run is segments of one row in a line round a field, on stands with ballast, with fibre between segments. These pages are for looking boards up and comparing them.
It is listed on the LianTronics page, among the perimeter boards from every maker in the database, and in the full panel database.