This sheet gives the datasheet figures for the LG LBB100DD3, a 10 mm sports perimeter board in a 1600 × 900 mm cabinet. Where the maker's sheet is silent, the row says so.
| Manufacturer | LG, LBB Stadium series |
| Pixel pitch | 10 mm |
| Cabinet size | 1600 × 900 × 124 mm |
| Pixels per cabinet | 160 × 90 (14,400 px) |
| Weight | 65 kg (45 kg/m², derived) |
| Maximum power | 520 W/m² (750 W per cabinet) |
| Typical power | 250 W per cabinet (174 W/m², derived) |
| Brightness | 6,000 nits |
| Refresh rate | 3,840 Hz |
| Viewing angle (H / V) | 160° / 120° |
| Ingress protection | IP65 front and back |
| Stand tilt | not published |
Source: LG LBB Stadium Series spec sheet (2023), retrieved 2026-10-07. LG US sells it as a "Stadium Series Perimeter Board"; on 7 October 2026 it was listed as active on LG US and gone from lg.com. The sheet contradicts itself: its table gives 3,840 Hz where its text says 4,000 Hz, its text calls it a ribbon board, and its weight row prints 124 lbs beside 65.0 kg (65 kg is 143 lbs); 65 kg agrees with its weight per m² and is stored. Brightness is 6,000 nits after calibration, "customizable up to 8,500 nits" in the text.
Perimeter planning is not in the RigPlan planner yet. The planner works in one rectangle of panels, flown, stacked or wall-mounted; a perimeter run is segments of one row in a line round a field, on stands with ballast, with fibre between segments. These pages are for looking boards up and comparing them.
It is listed on the LG page, among the perimeter boards from every maker in the database, and in the full panel database.