This page sets the datasheet figures of two sports perimeter boards side by side, with weight and draw per square metre worked out where a sheet prints them per cabinet or the other way round.
| AOTO SP10V-1600X1200 | LG LBB100DD3 | |
|---|---|---|
| Manufacturer | AOTO, SP series | LG, LBB Stadium series |
| Pixel pitch | 10 mm | 10 mm |
| Cabinet size | 1600 × 1200 × 120 mm | 1600 × 900 × 124 mm |
| Pixels per cabinet | 160 × 120 (19,200 px) | 160 × 90 (14,400 px) |
| Weight | 65 kg (34 kg/m², derived) | 65 kg (45 kg/m², derived) |
| Maximum power | 1,300 W per cabinet (677 W/m², derived) | 520 W/m² (750 W per cabinet) |
| Typical power | 382 W per cabinet (199 W/m², derived) | 250 W per cabinet (174 W/m², derived) |
| Brightness | 6,000 nits | 6,000 nits |
| Refresh rate | 18,000 Hz | 3,840 Hz |
| Viewing angle (H / V) | 160° / 100° | 160° / 120° |
| Ingress protection | IP65 | IP65 front and back |
| Stand tilt | not published | not published |
By weight per square metre, the AOTO SP10V-1600X1200 is the lighter board: 34 kg/m² against 45 kg/m² for the LG LBB100DD3, which is what the ballast and the stands carry along a run.
On typical content the LG LBB100DD3 draws less: 174 W/m² against 199 W/m² for the AOTO SP10V-1600X1200.
Perimeter planning is not in the RigPlan planner yet. The planner works in one rectangle of panels, flown, stacked or wall-mounted; a perimeter run is segments of one row in a line round a field, on stands with ballast, with fibre between segments. These pages are for looking boards up and comparing them. Every board in the database is on the perimeter boards list.