This sheet gives the datasheet figures for the INFiLED IL-PSS-ORSP6.25 Pro, a 6.25 mm sports perimeter board in a 1600 × 900 mm cabinet. Where the maker's sheet is silent, the row says so.
| Manufacturer | INFiLED, SP series |
| Pixel pitch | 6.25 mm |
| Cabinet size | 1600 × 900 mm |
| Pixels per cabinet | 256 × 144 (36,864 px) |
| Weight | 65 kg (45 kg/m², derived) |
| Maximum power | 1,050 W per cabinet (729 W/m², derived) |
| Typical power | 350 W per cabinet (243 W/m², derived) |
| Brightness | 5,000 nits |
| Refresh rate | 3,840 Hz |
| Viewing angle (H / V) | 160° / 110° |
| Ingress protection | IP65 |
| Stand tilt | not published |
Source: INFiLED IL-PSS-ORSP6.25 Pro product page, retrieved 2026-10-07. One of six boards in the SP Series, engineered to UEFA requirements. The product page prints the cabinet as 1600 × 900 mm beside an inch figure (62.99 × 37.64 in) that is the 1600 × 956 mm of the standard model; the mm figure is stored. Weight and power match the standard model. It differs from the Lite only in scan rate, 1/3 against 1/6.
Perimeter planning is not in the RigPlan planner yet. The planner works in one rectangle of panels, flown, stacked or wall-mounted; a perimeter run is segments of one row in a line round a field, on stands with ballast, with fibre between segments. These pages are for looking boards up and comparing them.
It is listed on the INFiLED page, among the perimeter boards from every maker in the database, and in the full panel database.