This page sets the datasheet figures of two sports perimeter boards side by side, with weight and draw per square metre worked out where a sheet prints them per cabinet or the other way round.
| AOTO SP06V | INFiLED IL-PSS-ORSP6.25 Pro | |
|---|---|---|
| Manufacturer | AOTO, SP series | INFiLED, SP series |
| Pixel pitch | 6.25 mm | 6.25 mm |
| Cabinet size | 1600 × 900 × 120 mm | 1600 × 900 mm |
| Pixels per cabinet | 256 × 144 (36,864 px) | 256 × 144 (36,864 px) |
| Weight | 52 kg (36 kg/m², derived) | 65 kg (45 kg/m², derived) |
| Maximum power | 920 W per cabinet (639 W/m², derived) | 1,050 W per cabinet (729 W/m², derived) |
| Typical power | 290 W per cabinet (201 W/m², derived) | 350 W per cabinet (243 W/m², derived) |
| Brightness | 6,000 nits | 5,000 nits |
| Refresh rate | 10,000 Hz | 3,840 Hz |
| Viewing angle (H / V) | 160° / 130° | 160° / 110° |
| Ingress protection | IP65 | IP65 |
| Stand tilt | not published | not published |
By weight per square metre, the AOTO SP06V is the lighter board: 36 kg/m² against 45 kg/m² for the INFiLED IL-PSS-ORSP6.25 Pro, which is what the ballast and the stands carry along a run.
On typical content the AOTO SP06V draws less: 201 W/m² against 243 W/m² for the INFiLED IL-PSS-ORSP6.25 Pro.
The AOTO SP06V is rated brighter, 6,000 nits against 5,000 nits.
Perimeter planning is not in the RigPlan planner yet. The planner works in one rectangle of panels, flown, stacked or wall-mounted; a perimeter run is segments of one row in a line round a field, on stands with ballast, with fibre between segments. These pages are for looking boards up and comparing them. Every board in the database is on the perimeter boards list.