This sheet gives the datasheet figures for the Dicolor F2-100, a 10 mm sports perimeter board in a 1280 × 960 mm cabinet. Where the maker's sheet is silent, the row says so.
| Manufacturer | Dicolor, F2 series |
| Pixel pitch | 10 mm |
| Cabinet size | 1280 × 960 × 100 mm |
| Pixels per cabinet | not published |
| Weight | 45 kg (37 kg/m², derived) |
| Maximum power | not published |
| Typical power | 258 W/m² (317 W per cabinet, derived) |
| Brightness | 8,000 nits |
| Refresh rate | 3,840 Hz |
| Viewing angle (H / V) | not published |
| Ingress protection | IP65 front, IP54 back |
| Stand tilt | 70° to 90°, in 5° steps |
Source: Dicolor F2-100 product sheet (PDF), retrieved 2026-10-07. Sports stadium board ("Super Slim Sport Stadium Screen Solution") with front-service modules, die-cast aluminium modules, dual backup for power supply and receiving card, a removable air pressure bar for impact cushioning, an emergency exit design (fast lock and return pulley under each cabinet) and a dedicated dolly. Sheet gives 8,000 nits, a refresh rate of at least 3,840 Hz, 14-bit colour depth, IP65 front and IP54 back, an average draw of 258 W/m² and 45 kg. It publishes no maximum draw, no pixel resolution and no viewing angle. The 100 mm depth is read off the dimensioned drawing.
Perimeter planning is not in the RigPlan planner yet. The planner works in one rectangle of panels, flown, stacked or wall-mounted; a perimeter run is segments of one row in a line round a field, on stands with ballast, with fibre between segments. These pages are for looking boards up and comparing them.
It is listed on the Dicolor page, among the perimeter boards from every maker in the database, and in the full panel database.