RigPlan.app

Planar DLPro 0.9B vs Unilumin UpanelS MP 0.9

0.945 mm against 0.95 mm · specifications from both manufacturers' datasheets

Side-by-side specifications, then the same wall built from each tile, so the comparison is in panels, kilograms, circuits and data runs rather than in marketing copy.

Specifications

Planar DLPro 0.9BUnilumin UpanelS MP 0.9
ManufacturerPlanarUnilumin
Pixel pitch0.945 mm0.95 mm
Cabinet604.8 × 340.2 mm609.92 × 343.08 mm
Brightness1,000 nits600 nits
Refresh rate3,840 Hz3,840 Hz
Viewing angle170° / 140°160° / 160°
Pixels per cabinet640 × 360640 × 360
Pixels per m²1,119,7891,101,068
Weight6.94 kg (34 kg/m²)6.8 kg (32 kg/m²)
Max power135 W (656 W/m²)145 W (693 W/m²)
Typical power45 W*51 W
Max hangnot published20 panels

* Average draw estimated as max ÷ 3; this manufacturer publishes no average figure.

The same wall, built from eachclosest 16:9 / 16:10 near 8 m wide, flown, EU power, 60 Hz 8-bit

Planar DLPro 0.9BUnilumin UpanelS MP 0.9
Wall built13 × 13, 7.86 × 4.42 m13 × 13, 7.93 × 4.46 m
Panels needed169 + 9 spare169 + 9 spare
Resolution8,320 × 4,680 px8,320 × 4,680 px
Weight incl. bumpers1,338 kg1,314 kg
Load per point~535 kg across 3~526 kg across 3
Power, full white22.8 kW24.5 kW
Circuits (16 A/230 V)1313
Data runs91 at ≤2/port91 at ≤2/port
Truck, linear9 m9 m

Whole cabinets rarely hit an identical size, so each wall is the closest build to a real video format (16:9 or 16:10) near 8 m wide for that tile: 7.86 × 4.42 m and 7.93 × 4.46 m respectively.

What the numbers say

Comparing something else, or your own OEM tile? The comparison tool takes any panels, up to four at once, at your wall size. Add your own spec once in the calculator and it appears there alongside the catalogue.

Open these two in the tool

Full specifications

Related comparisons