This sheet gives the datasheet figures for the Linsn LED OF800-S P6.25, a 6.25 mm sports perimeter board in a 800 × 900 mm cabinet. Where the maker's sheet is silent, the row says so.
| Manufacturer | Linsn LED, OF800-S series |
| Pixel pitch | 6.25 mm |
| Cabinet size | 800 × 900 × 98 mm |
| Pixels per cabinet | not published |
| Weight | 22 kg (31 kg/m², derived) |
| Maximum power | not published |
| Typical power | not published |
| Brightness | 6,500 nits |
| Refresh rate | 1,920 Hz |
| Viewing angle (H / V) | not published |
| Ingress protection | IP65 |
| Stand tilt | not published |
Source: Linsn LED OF800-S product page, retrieved 2026-10-07. The sports version of Linsn’s OF800 front-service cabinet, with a soft module mask and adjustable back brackets, on Linsn’s perimeter list. The table prints power as 600 W maximum and 300 W average with no basis, per cabinet or per m², so power is not stored. Brightness 5,500 to 6,500 (the top is stored), refresh at least 1,920 Hz. No cabinet resolution is printed. Linsn’s sports page prints the depth as 87 mm; the table, stored here, says 98 mm.
Perimeter planning is not in the RigPlan planner yet. The planner works in one rectangle of panels, flown, stacked or wall-mounted; a perimeter run is segments of one row in a line round a field, on stands with ballast, with fibre between segments. These pages are for looking boards up and comparing them.
It is listed on the Linsn LED page, among the perimeter boards from every maker in the database, and in the full panel database.