This sheet gives the datasheet figures for the Linsn LED MA960-S Outdoor P10, a 10 mm sports perimeter board in a 960 × 960 mm cabinet. Where the maker's sheet is silent, the row says so.
| Manufacturer | Linsn LED, MA960-S series |
| Pixel pitch | 10 mm |
| Cabinet size | 960 × 960 × 87 mm |
| Pixels per cabinet | 96 × 96 (9,216 px) |
| Weight | 28 kg (30 kg/m², derived) |
| Maximum power | 680 W per cabinet (738 W/m², derived) |
| Typical power | 408 W per cabinet (443 W/m², derived) |
| Brightness | 6,500 nits |
| Refresh rate | 3,840 Hz |
| Viewing angle (H / V) | not published |
| Ingress protection | IP65 |
| Stand tilt | not published |
Source: Linsn LED MA960-S product page, outdoor table, retrieved 2026-10-07. The outdoor version of Linsn’s sports cabinet ("Fixed Installation, Rental, or Perimeter LED Display"), with soft masks; Linsn’s sports brochure names stadium perimeter use. The figures stored are the page table’s, which Linsn’s 2026 catalogue repeats; the spec sheet linked from the same page prints other ones for this pitch: 280 W average, 750 W maximum, 26 kg. Refresh as at least 3,840 Hz. No viewing angle is printed.
Perimeter planning is not in the RigPlan planner yet. The planner works in one rectangle of panels, flown, stacked or wall-mounted; a perimeter run is segments of one row in a line round a field, on stands with ballast, with fibre between segments. These pages are for looking boards up and comparing them.
It is listed on the Linsn LED page, among the perimeter boards from every maker in the database, and in the full panel database.