This sheet gives the datasheet figures for the Linsn LED MA960-S Indoor P4, a 4 mm sports perimeter board in a 960 × 960 mm cabinet. Where the maker's sheet is silent, the row says so.
| Manufacturer | Linsn LED, MA960-S series |
| Pixel pitch | 4 mm |
| Cabinet size | 960 × 960 × 87 mm |
| Pixels per cabinet | 240 × 240 (57,600 px) |
| Weight | 24 kg (26 kg/m², derived) |
| Maximum power | 450 W per cabinet (488 W/m², derived) |
| Typical power | 270 W per cabinet (293 W/m², derived) |
| Brightness | 800 nits |
| Refresh rate | 3,840 Hz |
| Viewing angle (H / V) | not published |
| Ingress protection | IP50 |
| Stand tilt | not published |
Source: Linsn LED MA960-S product page, indoor table, retrieved 2026-10-07. The indoor version of Linsn’s sports cabinet, for indoor stadium perimeter use per Linsn’s sports brochure. The page table prints brightness as 800 to 800 nits and refresh as 1,920 to 3,840 Hz (the tops are stored), and the average power as "270w" with no basis; Linsn’s 2026 catalogue gives it as 270 W per cabinet. The spec sheet linked from the same page prints other figures for this pitch: 350 W average, 880 W maximum, at least 960 Hz and IP43.
Perimeter planning is not in the RigPlan planner yet. The planner works in one rectangle of panels, flown, stacked or wall-mounted; a perimeter run is segments of one row in a line round a field, on stands with ballast, with fibre between segments. These pages are for looking boards up and comparing them.
It is listed on the Linsn LED page, among the perimeter boards from every maker in the database, and in the full panel database.