This sheet gives the datasheet figures for the Linsn LED EX1600-S P10, a 10 mm sports perimeter board in a 1600 × 960 mm cabinet. Where the maker's sheet is silent, the row says so.
| Manufacturer | Linsn LED, EX1600-S series |
| Pixel pitch | 10 mm |
| Cabinet size | 1600 × 960 mm |
| Pixels per cabinet | 160 × 96 (15,360 px) |
| Weight | not published |
| Maximum power | 800 W/m² (1,229 W per cabinet, derived) |
| Typical power | 400 W/m² (614 W per cabinet, derived) |
| Brightness | 6,000 nits |
| Refresh rate | 3,840 Hz |
| Viewing angle (H / V) | not published |
| Ingress protection | IP65 |
| Stand tilt | not published |
Source: Linsn LED EX1600-S product page, retrieved 2026-10-07. Sold as a "Sports Perimeter LED Display" that stands on a flexible back bracket. The table prints power per m² only, the average as a range of 350 to 400 W/m² (the top is stored), brightness as at least 6,000 nits (the text says above 5,000) and refresh as at least 3,840 Hz. It labels the cabinet with a resolution of 144 × 24 dots that does not fit it; the panel resolution, which does, is stored. No weight, depth, viewing angle or bracket angle is printed.
Perimeter planning is not in the RigPlan planner yet. The planner works in one rectangle of panels, flown, stacked or wall-mounted; a perimeter run is segments of one row in a line round a field, on stands with ballast, with fibre between segments. These pages are for looking boards up and comparing them.
It is listed on the Linsn LED page, among the perimeter boards from every maker in the database, and in the full panel database.