This sheet gives the datasheet figures for the LG GPPA100-GA, a 10 mm sports perimeter board in a 1600 × 960 mm cabinet. Where the maker's sheet is silent, the row says so.
| Manufacturer | LG, GPPA series |
| Pixel pitch | 10 mm |
| Cabinet size | 1600 × 960 × 120 mm |
| Pixels per cabinet | 160 × 90 (14,400 px) |
| Weight | 46 kg (30 kg/m², derived) |
| Maximum power | 750 W/m² (1,080 W per cabinet) |
| Typical power | 360 W per cabinet (234 W/m², derived) |
| Brightness | 6,000 nits |
| Refresh rate | 7,680 Hz |
| Viewing angle (H / V) | 160° / 120° |
| Ingress protection | IP65 front and back |
| Stand tilt | not published |
Source: LG GPPA100-GA product page (lg.com), retrieved 2026-10-07. LG’s "Perimeter Outdoor LED Signage" for the spectator side of the field, meeting the UEFA LED requirements of July 2024, with an EVA top and rubber louvers for player safety. The page prints power both per cabinet (1,080 W maximum, 360 W average) and per m² (750 W maximum), a screen of 1600 × 900 mm in the 1600 × 960 mm cabinet, and 29.95 kg/m². Its power per m² is the cabinet figure over that screen (1,080 W over 1.44 m²); its weight per m² is the 46 kg over the whole cabinet face (1.536 m²). LG’s US spec sheet gives the rear rating as IP54 where this page says IP65. No tilt angle is printed.
Perimeter planning is not in the RigPlan planner yet. The planner works in one rectangle of panels, flown, stacked or wall-mounted; a perimeter run is segments of one row in a line round a field, on stands with ballast, with fibre between segments. These pages are for looking boards up and comparing them.
It is listed on the LG page, among the perimeter boards from every maker in the database, and in the full panel database.