This sheet gives the datasheet figures for the AOTO SP10V, a 10 mm sports perimeter board in a 1600 × 900 mm cabinet. Where the maker's sheet is silent, the row says so.
| Manufacturer | AOTO, SP series |
| Pixel pitch | 10 mm |
| Cabinet size | 1600 × 900 × 120 mm |
| Pixels per cabinet | 160 × 90 (14,400 px) |
| Weight | 52 kg (36 kg/m², derived) |
| Maximum power | 1,000 W per cabinet (694 W/m², derived) |
| Typical power | 290 W per cabinet (201 W/m², derived) |
| Brightness | 6,000 nits |
| Refresh rate | 18,000 Hz |
| Viewing angle (H / V) | 160° / 100° |
| Ingress protection | IP65 |
| Stand tilt | not published |
Source: AOTO SP Series datasheet (September 2025), retrieved 2026-10-07. AOTO’s sports perimeter board, "specifically made for sports stadiums" (the only product under Sports on en.aoto.com). The sheet prints the weight as at most 52 kg, the brightness as at least 6,000 nits, power per cabinet with a tolerance of ±10% and viewing angles with ±10°. Its IP row says only "Outdoor"; the IP65 is the series page’s, stated for the whole series. The sheet’s pixel density row repeats the 6.25 mm model’s 25,600 dots/m²; its own 160 × 90 px on a 1.44 m² cabinet make 10,000.
Perimeter planning is not in the RigPlan planner yet. The planner works in one rectangle of panels, flown, stacked or wall-mounted; a perimeter run is segments of one row in a line round a field, on stands with ballast, with fibre between segments. These pages are for looking boards up and comparing them.
It is listed on the AOTO page, among the perimeter boards from every maker in the database, and in the full panel database.