10 panels · 10 source documents · last read 17 September 2026 · rigplan.app/panels/manufacturer/siliconcore/review
This sheet lists every value RigPlan stores for SiliconCore panels, as stored, with the document each was read from and the day it was read. Write anything that disagrees with the current datasheet in the correction column and send the sheet back to erik@enrenterprises.com; corrections go live within a day.
Indoor fixed-install cabinet, SMD 0606, front or optional rear service, two 304 × 342 mm modules. Page gives 736/245 W/m² maximum and average at 1,200 nits and 187 W/m² typical at 800 nits. No hanging limit is published, so the hang figure is a placeholder.
Indoor fixed-install cabinet, SMD 1011, front service, two 304 × 342 mm modules. Page gives 477/257 W/m² maximum and average at 1,200 nits and 318/203 W/m² at 600 nits. Headline pitch 1.2 mm; the page’s own geometry (608 mm ÷ 480 px) gives 1.267 mm. No hanging limit is published, so the hang figure is a placeholder.
Indoor fixed-install cabinet, SMD 0808, front service build listed (7.2 kg, 74.8 mm deep); the rear-service build is 95.4 mm deep at 7.6 kg. Two 240 × 270 mm modules. Page gives 856/285 W/m² maximum and typical at 1,500 nits and 556/185 W/m² at 800 nits. No hanging limit is published, so the hang figure is a placeholder.
Indoor fixed-install cabinet, SMD 1011, front service build listed (76 mm deep); the rear-service build is 82 mm deep at the same 9.8 kg. Two 304 × 342 mm modules, IP20; IP40 front with the LISA coating. Page gives 558/298 W/m² maximum and typical at 1,200 nits without LISA (586/268 with it) and 499/268 W/m² at 800 nits. No hanging limit is published, so the hang figure is a placeholder.
Indoor fixed-install cabinet, SMD 1514, front service, two 304 × 342 mm modules. Page gives 673/224 W/m² maximum and typical at 1,500 nits and 390/149 W/m² at 800 nits. No hanging limit is published, so the hang figure is a placeholder.
Indoor fixed-install cabinet, SMD 1514, front service, two 304 × 342 mm modules, the 3,000-nit build of the Orchid. Page gives 682/371 W/m² maximum and typical at 3,000 nits and 340/258 W/m² at 800 nits; refresh is given as above 1,900 Hz only. No hanging limit is published, so the hang figure is a placeholder.
Indoor fixed-install cabinet, SMD 1514, front service, two 304 × 342 mm modules. Page gives 678/226 W/m² maximum and typical at 1,700 nits and 77 W per cabinet at 800 nits. Headline pitch 2.5 mm; the page’s own geometry (608 mm ÷ 240 px) gives 2.533 mm. No hanging limit is published, so the hang figure is a placeholder.
Indoor fixed-install cabinet, SMD 1514, front or rear service with quick connect, four 500 × 125 mm modules. Page gives 840/280 W/m² maximum and typical at 1,700 nits and 166 W per cabinet at 800 nits. No hanging limit is published, so the hang figure is a placeholder.
Outdoor fixed-install cabinet, IP65, SMD 2121, rear service, four 500 × 125 mm modules. Page gives 516/172 W/m² maximum and typical at 4,500 nits and 46 W per cabinet at 800 nits. No hanging limit is published, so the hang figure is a placeholder.
Indoor fixed-install cabinet, SMD 2121, front or rear service, four 500 × 125 mm modules; a 3,000-nit high-brightness build comes as a 500 × 250 mm cabinet. Page gives 504/221 W/m² maximum and average at 1,500 nits and 38 W per cabinet at 800 nits; refresh is given as above 1,900 Hz only. No hanging limit is published, so the hang figure is a placeholder.
These SiliconCore entries are on the maker page as names only, because the document RigPlan found lacked the figures named here.
SiliconCore Iris 0.78 and Lotus 0.83 · 0.78 to 0.83 mm: known Up to 1,200 nits, 120 Hz frame rate, 16:9 cabinets, common-cathode drive; missing Cabinet size, resolution, weight and power: the product pages carry no specification table for either.. https://www.silicon-core.com/products/iris