RigPlan.app

Planar DLPro 1.5M05 vs Unilumin UpanelS MP 1.5

1.575 mm against 1.58 mm · specifications from both manufacturers' datasheets

Side-by-side specifications, then the same wall built from each tile, so the comparison is in panels, kilograms, circuits and data runs rather than in marketing copy.

Specifications

Planar DLPro 1.5M05Unilumin UpanelS MP 1.5
ManufacturerPlanarUnilumin
Pixel pitch1.575 mm1.58 mm
Cabinet604.8 × 340.2 mm609.92 × 343.08 mm
Brightness500 nits600 nits
Refresh rate3,840 Hz3,840 Hz
Viewing angle170° / 170°160° / 160°
Pixels per cabinet384 × 216384 × 216
Pixels per m²403,124396,385
Weight6.94 kg (34 kg/m²)6.8 kg (32 kg/m²)
Max power68 W (330 W/m²)132 W (631 W/m²)
Typical power23 W*44 W
Max hangnot published20 panels

* Average draw estimated as max ÷ 3; this manufacturer publishes no average figure.

The same wall, built from eachclosest 16:9 / 16:10 near 8 m wide, flown, EU power, 60 Hz 8-bit

Planar DLPro 1.5M05Unilumin UpanelS MP 1.5
Wall built13 × 13, 7.86 × 4.42 m13 × 13, 7.93 × 4.46 m
Panels needed169 + 9 spare169 + 9 spare
Resolution4,992 × 2,808 px4,992 × 2,808 px
Weight incl. bumpers1,338 kg1,314 kg
Load per point~535 kg across 3~526 kg across 3
Power, full white11.5 kW22.3 kW
Circuits (16 A/230 V)513
Data runs39 at ≤6/port39 at ≤6/port
Truck, linear7.5 m7.5 m

Whole cabinets rarely hit an identical size, so each wall is the closest build to a real video format (16:9 or 16:10) near 8 m wide for that tile: 7.86 × 4.42 m and 7.93 × 4.46 m respectively.

What the numbers say

Comparing something else, or your own OEM tile? The comparison tool takes any panels, up to four at once, at your wall size. Add your own spec once in the calculator and it appears there alongside the catalogue.

Open these two in the tool

Full specifications

Related comparisons