This page sets the datasheet figures of two sports perimeter boards side by side, with weight and draw per square metre worked out where a sheet prints them per cabinet or the other way round.
| Linsn LED OF800-S P8.33 | Unilumin Usport X 8 | |
|---|---|---|
| Manufacturer | Linsn LED, OF800-S series | Unilumin, Usport X series |
| Pixel pitch | 8.33 mm | 8.33 mm |
| Cabinet size | 800 × 900 × 98 mm | 1600 × 900 × 105 mm |
| Pixels per cabinet | not published | 192 × 108 (20,736 px) |
| Weight | 22 kg (31 kg/m², derived) | 39 kg/m² (56 kg per cabinet, derived) |
| Maximum power | not published | 650 W/m² (936 W per cabinet, derived) |
| Typical power | not published | 217 W/m² (312 W per cabinet, derived) |
| Brightness | 6,500 nits | 6,000 nits |
| Refresh rate | 1,920 Hz | 7,680 Hz |
| Viewing angle (H / V) | not published | 150° / 110° |
| Ingress protection | IP65 | IP65 |
| Stand tilt | not published | not published |
By weight per square metre, the Linsn LED OF800-S P8.33 is the lighter board: 31 kg/m² against 39 kg/m² for the Unilumin Usport X 8, which is what the ballast and the stands carry along a run.
Circuits are sized on maximum draw, and the sheet for the Linsn LED OF800-S P8.33 does not publish it, so a power plan for a run needs that figure from the maker.
The Linsn LED OF800-S P8.33 is rated brighter, 6,500 nits against 6,000 nits.
Perimeter planning is not in the RigPlan planner yet. The planner works in one rectangle of panels, flown, stacked or wall-mounted; a perimeter run is segments of one row in a line round a field, on stands with ballast, with fibre between segments. These pages are for looking boards up and comparing them. Every board in the database is on the perimeter boards list.