This page sets the datasheet figures of two sports perimeter boards side by side, with weight and draw per square metre worked out where a sheet prints them per cabinet or the other way round.
| Linsn LED MA960-S Outdoor P5 | QSTECH SP7262 | |
|---|---|---|
| Manufacturer | Linsn LED, MA960-S series | QSTECH, SP72 series |
| Pixel pitch | 5 mm | 6.2 mm |
| Cabinet size | 960 × 960 × 87 mm | 1600 × 900 × 110 mm |
| Pixels per cabinet | 192 × 192 (36,864 px) | not published |
| Weight | 28 kg (30 kg/m², derived) | 48 kg (33 kg/m², derived) |
| Maximum power | 630 W per cabinet (684 W/m², derived) | not published |
| Typical power | 380 W per cabinet (412 W/m², derived) | not published |
| Brightness | 5,500 nits | 6,000 nits |
| Refresh rate | 3,840 Hz | 15,000 Hz |
| Viewing angle (H / V) | not published | not published |
| Ingress protection | IP65 | IP66 front and back |
| Stand tilt | not published | not published |
By weight per square metre, the Linsn LED MA960-S Outdoor P5 is the lighter board: 30 kg/m² against 33 kg/m² for the QSTECH SP7262, which is what the ballast and the stands carry along a run.
Circuits are sized on maximum draw, and the sheet for the QSTECH SP7262 does not publish it, so a power plan for a run needs that figure from the maker.
The QSTECH SP7262 is rated brighter, 6,000 nits against 5,500 nits.
Perimeter planning is not in the RigPlan planner yet. The planner works in one rectangle of panels, flown, stacked or wall-mounted; a perimeter run is segments of one row in a line round a field, on stands with ballast, with fibre between segments. These pages are for looking boards up and comparing them. Every board in the database is on the perimeter boards list.