This page sets the datasheet figures of two sports perimeter boards side by side, with weight and draw per square metre worked out where a sheet prints them per cabinet or the other way round.
| Linsn LED MA960-S Indoor P5 | Unilumin Usport MB 6 | |
|---|---|---|
| Manufacturer | Linsn LED, MA960-S series | Unilumin, Usport MB series |
| Pixel pitch | 5 mm | 6.25 mm |
| Cabinet size | 960 × 960 × 87 mm | 500 × 1000 × 85 mm |
| Pixels per cabinet | 192 × 192 (36,864 px) | 80 × 160 (12,800 px) |
| Weight | 24 kg (26 kg/m², derived) | 28 kg/m² (14 kg per cabinet, derived) |
| Maximum power | 450 W per cabinet (488 W/m², derived) | 280 W/m² (140 W per cabinet, derived) |
| Typical power | 270 W per cabinet (293 W/m², derived) | 95 W/m² (48 W per cabinet, derived) |
| Brightness | 800 nits | 2,000 nits |
| Refresh rate | 3,840 Hz | 7,680 Hz |
| Viewing angle (H / V) | not published | 160° / 130° |
| Ingress protection | IP50 | IP30 |
| Stand tilt | not published | not published |
By weight per square metre, the Linsn LED MA960-S Indoor P5 is the lighter board: 26 kg/m² against 28 kg/m² for the Unilumin Usport MB 6, which is what the ballast and the stands carry along a run.
On typical content the Unilumin Usport MB 6 draws less: 95 W/m² against 293 W/m² for the Linsn LED MA960-S Indoor P5.
The Unilumin Usport MB 6 is rated brighter, 2,000 nits against 800 nits.
Perimeter planning is not in the RigPlan planner yet. The planner works in one rectangle of panels, flown, stacked or wall-mounted; a perimeter run is segments of one row in a line round a field, on stands with ballast, with fibre between segments. These pages are for looking boards up and comparing them. Every board in the database is on the perimeter boards list.