This page sets the datasheet figures of two sports perimeter boards side by side, with weight and draw per square metre worked out where a sheet prints them per cabinet or the other way round.
| LianTronics SLG8.3 | Linsn LED MA960-S Outdoor P8 | |
|---|---|---|
| Manufacturer | LianTronics, SLG series | Linsn LED, MA960-S series |
| Pixel pitch | 8.3 mm | 8 mm |
| Cabinet size | 2000 × 900 × 98 mm | 960 × 960 × 87 mm |
| Pixels per cabinet | 240 × 108 (25,920 px) | 120 × 120 (14,400 px) |
| Weight | 29 kg/m² (52 kg per cabinet, derived) | 28 kg (30 kg/m², derived) |
| Maximum power | 780 W/m² (1,404 W per cabinet, derived) | 680 W per cabinet (738 W/m², derived) |
| Typical power | 195 W/m² (351 W per cabinet, derived) | 408 W per cabinet (443 W/m², derived) |
| Brightness | 6,000 nits | 5,500 nits |
| Refresh rate | 7,680 Hz | 3,840 Hz |
| Viewing angle (H / V) | 160° / 120° | not published |
| Ingress protection | IP65 | IP65 |
| Stand tilt | not published | not published |
By weight per square metre, the LianTronics SLG8.3 is the lighter board: 29 kg/m² against 30 kg/m² for the Linsn LED MA960-S Outdoor P8, which is what the ballast and the stands carry along a run.
On typical content the LianTronics SLG8.3 draws less: 195 W/m² against 443 W/m² for the Linsn LED MA960-S Outdoor P8.
The LianTronics SLG8.3 is rated brighter, 6,000 nits against 5,500 nits.
Perimeter planning is not in the RigPlan planner yet. The planner works in one rectangle of panels, flown, stacked or wall-mounted; a perimeter run is segments of one row in a line round a field, on stands with ballast, with fibre between segments. These pages are for looking boards up and comparing them. Every board in the database is on the perimeter boards list.