This page sets the datasheet figures of two sports perimeter boards side by side, with weight and draw per square metre worked out where a sheet prints them per cabinet or the other way round.
| LianTronics SLG8.3 | Linsn LED EX1600-S P8 | |
|---|---|---|
| Manufacturer | LianTronics, SLG series | Linsn LED, EX1600-S series |
| Pixel pitch | 8.3 mm | 8 mm |
| Cabinet size | 2000 × 900 × 98 mm | 1600 × 960 mm |
| Pixels per cabinet | 240 × 108 (25,920 px) | 200 × 120 (24,000 px) |
| Weight | 29 kg/m² (52 kg per cabinet, derived) | not published |
| Maximum power | 780 W/m² (1,404 W per cabinet, derived) | 800 W/m² (1,229 W per cabinet, derived) |
| Typical power | 195 W/m² (351 W per cabinet, derived) | 400 W/m² (614 W per cabinet, derived) |
| Brightness | 6,000 nits | 6,000 nits |
| Refresh rate | 7,680 Hz | 3,840 Hz |
| Viewing angle (H / V) | 160° / 120° | not published |
| Ingress protection | IP65 | IP65 |
| Stand tilt | not published | not published |
On typical content the LianTronics SLG8.3 draws less: 195 W/m² against 400 W/m² for the Linsn LED EX1600-S P8.
Perimeter planning is not in the RigPlan planner yet. The planner works in one rectangle of panels, flown, stacked or wall-mounted; a perimeter run is segments of one row in a line round a field, on stands with ballast, with fibre between segments. These pages are for looking boards up and comparing them. Every board in the database is on the perimeter boards list.