This page sets the datasheet figures of two sports perimeter boards side by side, with weight and draw per square metre worked out where a sheet prints them per cabinet or the other way round.
| AOTO SP10V-1600X1200 | QSTECH SP72A0S | |
|---|---|---|
| Manufacturer | AOTO, SP series | QSTECH, SP72 series |
| Pixel pitch | 10 mm | 10 mm |
| Cabinet size | 1600 × 1200 × 120 mm | 1600 × 900 × 110 mm |
| Pixels per cabinet | 160 × 120 (19,200 px) | not published |
| Weight | 65 kg (34 kg/m², derived) | 48 kg (33 kg/m², derived) |
| Maximum power | 1,300 W per cabinet (677 W/m², derived) | not published |
| Typical power | 382 W per cabinet (199 W/m², derived) | not published |
| Brightness | 6,000 nits | 7,000 nits |
| Refresh rate | 18,000 Hz | 15,000 Hz |
| Viewing angle (H / V) | 160° / 100° | not published |
| Ingress protection | IP65 | IP66 front and back |
| Stand tilt | not published | not published |
By weight per square metre, the QSTECH SP72A0S is the lighter board: 33 kg/m² against 34 kg/m² for the AOTO SP10V-1600X1200, which is what the ballast and the stands carry along a run.
Circuits are sized on maximum draw, and the sheet for the QSTECH SP72A0S does not publish it, so a power plan for a run needs that figure from the maker.
The QSTECH SP72A0S is rated brighter, 7,000 nits against 6,000 nits.
Perimeter planning is not in the RigPlan planner yet. The planner works in one rectangle of panels, flown, stacked or wall-mounted; a perimeter run is segments of one row in a line round a field, on stands with ballast, with fibre between segments. These pages are for looking boards up and comparing them. Every board in the database is on the perimeter boards list.