RigPlan.app

Blizzard IRiS InSignia IP7 vs PixelFLEX FLEXStorm Pro 8

7.8125 mm against 8 mm · specifications from both manufacturers' datasheets

Side-by-side specifications, then the same wall built from each tile, so the comparison is in panels, kilograms, circuits and data runs rather than in marketing copy.

Specifications

Blizzard IRiS InSignia IP7PixelFLEX FLEXStorm Pro 8
ManufacturerBlizzard IRiSPixelFLEX
Pixel pitch7.8125 mm8 mm
Cabinet1000 × 1000 mm960 × 960 mm
Brightness6,000 nits10,000 nits
Refresh rate3,840 Hz3,840 Hz
Viewing anglenot published160° / 90°
Pixels per cabinet128 × 128120 × 120
Pixels per m²16,38415,625
Weight31 kg (31 kg/m²)28 kg (30 kg/m²)
Max power740 W (740 W/m²)553 W (600 W/m²)
Typical power247 W*184 W*
Max hangnot publishednot published

* Average draw estimated as max ÷ 3; this manufacturer publishes no average figure.

The same wall, built from eachclosest 16:9 / 16:10 near 8 m wide, flown, EU power, 60 Hz 8-bit

Blizzard IRiS InSignia IP7PixelFLEX FLEXStorm Pro 8
Wall built8 × 5, 8.00 × 5.00 m8 × 5, 7.68 × 4.80 m
Panels needed40 + 2 spare40 + 2 spare
Resolution1,024 × 640 px960 × 600 px
Weight incl. bumpers1,340 kg1,220 kg
Load per point~536 kg across 3~488 kg across 3
Power, full white29.6 kW22.1 kW
Circuits (16 A/230 V)158
Data runs2 at ≤31/port2 at ≤36/port
Truck, linear5.4 m3.3 m

Whole cabinets rarely hit an identical size, so each wall is the closest build to a real video format (16:9 or 16:10) near 8 m wide for that tile: 8.00 × 5.00 m and 7.68 × 4.80 m respectively.

What the numbers say

Comparing something else, or your own OEM tile? The comparison tool takes any panels, up to four at once, at your wall size. Add your own spec once in the calculator and it appears there alongside the catalogue.

Open these two in the tool

Full specifications

Related comparisons