RigPlan

Absen JP5 Pro 500×500 vs Leyard CLO5.2

5.2 mm against 5.2 mm · specifications from both manufacturers' datasheets

Side-by-side specifications, then the same wall built from each tile, so the comparison is in panels, kilograms, circuits and data runs rather than in marketing copy.

Specifications

Absen JP5 Pro 500×500Leyard CLO5.2
ManufacturerAbsenLeyard
Pixel pitch5.2 mm5.2 mm
Cabinet500 × 500 mm500 × 500 mm
Brightness5,000 nits5,000 nits
Refresh rate7,680 Hz3,000 Hz
Viewing angle140° / 140°140° / 140°
Pixels per cabinet96 × 9696 × 96
Pixels per m²36,86436,864
Weight9.5 kg (38 kg/m²)5 kg (20 kg/m²)
Max power173 W (692 W/m²)300 W (1200 W/m²)
Typical power58 W150 W
Max hang30 panelsnot published

The same wall, built from eachclosest 16:9 / 16:10 near 8 m wide, flown, EU power, 60 Hz 8-bit

Absen JP5 Pro 500×500Leyard CLO5.2
Wall built16 × 9, 8.00 × 4.50 m16 × 9, 8.00 × 4.50 m
Panels needed144 + 8 spare144 + 8 spare
Resolution1,536 × 864 px1,536 × 864 px
Weight incl. bumpers1,568 kg920 kg
Load per point~627 kg across 3~368 kg across 3
Power, full white24.9 kW43.2 kW
Circuits (16 A/230 V)916
Data runs3 at ≤56/port3 at ≤56/port
Truck, linear5.8 m5.8 m

Whole cabinets rarely hit an identical size, so each wall is the closest build to a real video format (16:9 or 16:10) near 8 m wide for that tile: 8.00 × 4.50 m and 8.00 × 4.50 m respectively.

What the numbers say

Comparing something else, or your own OEM tile? The comparison tool takes any panels, up to four at once, at your wall size. Add your own spec once in the calculator and it appears there alongside the catalogue.

Open these two in the tool

Full specifications

Related comparisons