Philips Unite LED 5000 series 5 panels · every figure from the maker's published datasheet
The Unite LED 5000 series from Philips (PPDS) , side by side: what the family shares and where the panels differ.
Every cabinet in the series is 600 × 337.5 mm. Depth 33.6 mm. Brightness 600 nits across the series. Refresh 3,840 Hz. No hanging limit is published for the series; the planner uses a placeholder and says so. The sheets publish both maximum and typical draw.
Panel by panel Philips (PPDS) 27HDL5178IP , 0.78125 mm, 600×337.5 mm at 4.7 kg and 75 W maximum, 600 nits, 3,840 Hz. Fixed-install COB cabinet, indoor, 22.9 kg/m².Philips (PPDS) 27HDL5193IP , 0.9375 mm, 600×337.5 mm at 4.7 kg and 86 W maximum, 600 nits, 3,840 Hz. Fixed-install COB cabinet, indoor, 22.9 kg/m².Philips (PPDS) 27HDL5112IP , 1.25 mm, 600×337.5 mm at 4.7 kg and 75 W maximum, 600 nits, 3,840 Hz. Fixed-install COB cabinet, indoor, 22.9 kg/m².Philips (PPDS) 27HDL5115IP , 1.5625 mm, 600×337.5 mm at 4.7 kg and 81 W maximum, 600 nits, 3,840 Hz. Fixed-install COB cabinet, indoor, 22.9 kg/m².Philips (PPDS) 27HDL5118IP , 1.875 mm, 600×337.5 mm at 4.7 kg and 65 W maximum, 600 nits, 3,840 Hz. Fixed-install COB cabinet, indoor, 22.9 kg/m².Open a panel for its full sheet and a wall calculator preloaded with it. Put two of them head to head in compare panels , or see Philips's other series: L-Line 6000 , Unite LED 3000 , Unite LED 6000 , Unite LED 6400 .
Sources: PPDS: 27HDL5178IP/00 product specifications (retrieved 2026-09-17) · PPDS: 27HDL5193IP/00 product specifications (retrieved 2026-09-17) · PPDS: 27HDL5112IP/00 product specifications (retrieved 2026-09-17) · PPDS: 27HDL5115IP/00 product specifications (retrieved 2026-09-17) · PPDS: 27HDL5118IP/00 product specifications (retrieved 2026-09-17)
RigPlan is a planning aid. Every panel and processor figure is transcribed from the maker’s own datasheet or product page, with the source and its retrieval date on the panel page; makers revise their sheets and transcription errors happen. IP ratings, brightness, refresh rates and temperature ranges are the maker’s claims under the maker’s test conditions, not a promise that a cabinet is weatherproof or fit for a job. Verify against the current sheet before quoting, hanging or powering anything; rigging and electrical outputs must be checked by a competent rigger or electrician. The terms say the same at length.