RigPlan

Esdlumen (LianTronics) ES3.9T · 3.9 mm

Manufacturer specifications, a worked example wall, and a live calculator preloaded with this tile. Change columns and rows to get resolution, power draw, circuits, the data wiring plan, rigging quantities and the complete pack list.

Spec sheet from the manufacturer datasheet

ManufacturerEsdlumen (LianTronics), E-Swan series
Pixel pitch3.9 mm
Cabinet size500 × 500 × 74 mm
Pixels per cabinet128 × 128 (16,384 px)
Weight8.5 kg (34 kg/m²)
Max power, full white138 W (552 W/m²)
Typical power35 W
Refresh rate7,680 Hz
Brightness5,000 nits
Viewing angle (H / V)140° / 140°
Max hang20 panels
Hanging bar weightnot published by manufacturer
Panels per dolly8 (our packing assumption)

Source: Esdlumen (LianTronics): E-Swan Series outdoor datasheet (2025.10) , retrieved 2026-09-11. Datasheet gives 550/138 W/m² for the 0.25 m² panel. Hang limit from the published maximum hanging height of 10 m, 20 of this 500 mm cabinet. Curved rental cabinet, IP65 outdoor. 5,000 nits with white LEDs, 3,500 with the black-LED build; the white figure is stored, so check which build is on the quote.

Worked example: a 16 × 9 wall (16:9)

16 columns by 9 rows of this tile makes a 8.00 × 4.50 m wall, the closest this cabinet gets to 16:9, at 2,048 × 1,152 pixels (2.36 MP): 144 panels plus 8 spares at the one-off rate. It weighs about 1,424 kg including bumpers, around 570 kg across each of 3 points.

On European power it draws 19.9 kW at full white (5 kW on typical content), which at an 80% derate is 8 × 16 A / 230 V circuits. Data comes to 6 runs at up to 31 panels per port, worst run 68% loaded, fitting 1 × Novastar VX1000. Every figure is derived by the calculator below. Change the numbers for your own wall.

Describe the wall

Start from a templateCorporate main screenIMAG side screenConcert side screen, portraitConcert side screen, outdoorFestival main stagexR volumeFine-pitch conference screenDJ riserTouring outdoor wallall templates

Walls

+ wall 🔒

Planning several walls on one job (main, IMAG, DJ riser) with shared spares and one truck sum is a Solo feature.

Specs from ROE Visual: Black Pearl specifications. Hanging limit valid with ROE hanging bars, indoor, safety factor 5.
Your panels · add custom spec

Datasheet PDF parsing (upload a sheet and the form is pre-filled) is a Solo feature. Manufacturers can always parse and submit sheets free on the vendors page.

Saved in this browser only for now; accounts sync them. Specs offered to the public database are reviewed by hand before publishing; leave the box unticked to keep a spec fully private.
8.00 × 4.50 m · 2,816 × 1,584 px · 16:9

Needs 2 × Novastar VX1000: 16 runs, 10 ports per unit.

Smallest NovaStar that carries this wall on one unit: MCTRL4K · 16 ports · 8.8 M px.

Job settingsEU 230 V / 16 A · one-off, 5% spares · 60 Hz 8-bit · 80% port load
Venue limits
What the venue and logistics actually offer. The job warns when the design exceeds them.

Quick resolution · size + pitch

2,069 × 1,034 px · 2.14 M px · 5× 1G @ 80%
Rough check before you know the panel. Assumes ~650 k px per 1G port at 60 Hz 8-bit, loaded to your port limit.

Rig stock · bumpers

What your shop owns, shared across every wall in the job and allocated in wall order. Shortfalls land on the wall that runs out. Used when flown. Saved in this browser. Assumes every rig hangs on the same bars. If your bars are system-specific, the Solo and Shop tiers track bars per panel system.
R143%R243%R343%R443%R543%R643%R743%R843%R943%R1043%R1143%R1243%R1343%R1443%R1543%R1643%2w2w2w2w2w2w2w2w~563 kg~563 kg~563 kg8.00 m · 2,816 px4.50 m · 1,584 px23 kW max · 8× 16 A / 230 V · 16 runs on 2× Novastar VX1000

Main: 16 × 9 ROE Visual BP2 V2

Size
8.00 × 4.50 m
Area
36.0 m²
Resolution
2,816 × 1,584 px
Pixels
4.46 M px
Panels
144 + 8 spares
Weight
1,408 kg incl. bumpers
Power
23 kW max, 11.5 kW typical, 8 circuits
Data
16 runs on 2 processors at 60 Hz 8-bit
Truck
6 m of deck

This is a live example. Change the panel and size in the rail and every figure recomputes.

RigPlanPrinted
Pack list
1 wall · 230 V / 16 A circuits · 60 Hz 8-bit
MainROE Visual BP2 V216 × 98.00 × 4.50 m2,816 × 1,584 pxflown
Panels
144 + 8 spares
Weight
1,408 kg incl. bumpers
Power
23 kW max, 11.5 kW typical, 8 circuits
Data
16 runs on 2 processors at 60 Hz 8-bit
Truck
6 m of deck

Pack list

0/22 packed
Pixel map 🔒Export for Rentman 🔒

Panels0/4 packed

144 pcsROE Black Pearl BP2 V2 tiles16×9 wall, 8.0×4.5 m
8 pcsSpare tilesone-off rate 5%
6 pcsSpare receiving cards
6 pcsSpare PSUs

Rigging0/6 packed

8 pcs2-wide bumpersfrom your stock · 7.7 kg each
3 pcsChain hoists, 1 tpoint load ~563 kg incl. 1.2 dyn.
6 pcsSteels, 1 m2 per point
6 pcsSpansets2 per point
12 pcsShackles, 3.25 t4 per point
9 mTruss to span wall+1 m overhang, or house points

Power0/3 packed

1 pcs63 A 3-phase distro23 kW max · ~11.5 kW typical content
8 pcsFeeder lines to wall (16 A / 230 V)~30 m each
150 pcsTRUE1 jumperspanel-to-panel, incl. 10% spare

Data & control0/3 packed

2 pcsNovastar VX100016/20 ports used
16 pcsCat6A home runs, ~40 mrun + height + 5 m loop
159 pcsCat6 panel jumpersincl. 10% spare

Cases & truck0/6 packed

19 pcsPanel dollies8 tiles per dolly
1 pcsBumper cases8 per case
6 pcsCable trunks~333 cables total
1 pcsRigging trunks
1 setGaff, velcro, zip ties, sharpiesalways
6 mTruck deck, linear29 cases est.

Data wiring16 runs · up to 16 panels per run at 80% · worst 43% · 2× Novastar VX1000

R143%R243%R343%R443%R543%R643%R743%R843%R943%R1043%R1143%R1243%R1343%R1443%R1543%R1643%2w2w2w2w2w2w2w2w~563 kg~563 kg~563 kg8.00 m · 2,816 px4.50 m · 1,584 px23 kW max · 8× 16 A / 230 V · 16 runs on 2× Novastar VX1000
Run 1Column 19 panels · 43% of port
Run 2Column 29 panels · 43% of port
Run 3Column 39 panels · 43% of port
Run 4Column 49 panels · 43% of port
Run 5Column 59 panels · 43% of port
Run 6Column 69 panels · 43% of port
Run 7Column 79 panels · 43% of port
Run 8Column 89 panels · 43% of port
Run 9Column 99 panels · 43% of port
Run 10Column 109 panels · 43% of port
Run 11Column 119 panels · 43% of port
Run 12Column 129 panels · 43% of port
Run 13Column 139 panels · 43% of port
Run 14Column 149 panels · 43% of port
Run 15Column 159 panels · 43% of port
Run 16Column 169 panels · 43% of port

Power runs8 circuits · up to 18 panels/circuit · 23 kW max · 1× distro

C1L1C2L2C3L3C4L1C5L2C6L3C7L1C8L22w2w2w2w2w2w2w2w~563 kg~563 kg~563 kg8.00 m · 2,816 px4.50 m · 1,584 px23 kW max · 8× 16 A / 230 V strings · phases L1 to L3 suggested
Circuit 1Columns 1 to 2, snake up and down, hops right18 panels · 2,880 W · 98% · Distro 1 · L1
Circuit 2Columns 3 to 4, snake up and down, hops right18 panels · 2,880 W · 98% · Distro 1 · L2
Circuit 3Columns 5 to 6, snake up and down, hops right18 panels · 2,880 W · 98% · Distro 1 · L3
Circuit 4Columns 7 to 8, snake up and down, hops right18 panels · 2,880 W · 98% · Distro 1 · L1
Circuit 5Columns 9 to 10, snake up and down, hops right18 panels · 2,880 W · 98% · Distro 1 · L2
Circuit 6Columns 11 to 12, snake up and down, hops right18 panels · 2,880 W · 98% · Distro 1 · L3
Circuit 7Columns 13 to 14, snake up and down, hops right18 panels · 2,880 W · 98% · Distro 1 · L1
Circuit 8Columns 15 to 16, snake up and down, hops right18 panels · 2,880 W · 98% · Distro 1 · L2
PatchDistro 1: circuits 1 to 8 (L1×3 L2×3 L3×2)

The rules behind every number

Every quantity above is derived from the rules below, written with working AV techs and corrected as they red-pen them.

  1. openSpare panels: 5% of wall count, minimum 2 (one-off).
  2. ✓ confirmedBumpers come from your stock, not a formula: widest first, combined to cover 16 columns. Partial coverage (a wider bar over fewer columns) is allowed and noted; shortfalls are flagged instead of invented.
  3. ✓ confirmedHanging bar weights from ROE Visual: 1-wide 4.5 kg, 2-wide 7.7 kg, 3-wide 11.3 kg. BO/BP hanging bar, clamp (V4.5 for 1-wide, V3.5 for 2- and 3-wide), Black Onyx & Pearl user manual V1.8 (2023-10-08); the shackle versions weigh 5.2, 8.4 and 12 kg.
  4. openRigging points: one per ≤3 m of wall width, minimum 2, giving 3. 1× 1 t hoist per point.
  5. openPer point: 2× steel, 2× spanset, 4× 3.25 t shackle.
  6. openPoint load: wall weight ÷ points × 1.2 dynamic factor. Warn above 800 kg per 1 t hoist.
  7. ✓ confirmedCircuits sized on max load (full white) at 80% derate: 18 panels per 16 A / 230 V circuit (160 W/panel). Typical draw shown separately for the venue/generator ask.
  8. ✓ confirmedPower runs follow the connectors: in one side, out the other, gendered plugs, jumpers as short as the maker can get away with. Vertical works both ways, sideways only one hop to the right (rear view), so a run may snake up and down across adjacent columns, but never left and right. Vertical snakes over 2 columns need 8 circuits (single columns would need 16, full rows 9).
  9. open1× 63 A 3-phase distro per 18 circuits (1). TRUE1 jumpers = panels − runs, +10% spare.
  10. ✓ confirmedRuns are load-balanced: panels split evenly across the circuits a shape needs (12+12, never 18+6) so every main-in pulls about the same. Phases are a suggested round-robin L1 to L3 within each distro.
  11. ✓ confirmedExact-pixel mapping (Novastar VX1000): a port carries only the panels wired to it, and data snakes in any direction (unlike power). Wiring follows whole columns as vertical serpentines, numbered from the left seen from the rear, the natural reading order when patching, with every run capped at 80% of 650 k px per 1G port at 60 Hz 8-bit (threshold, refresh and depth adjustable): at most 16 panels per run, giving 16 runs, worst run 43%. Loads balance evenly across runs. Capacity is the sheet figure at 8-bit; refresh scales as 60/Hz. No sheet publishes a per-port width cap; the MX40 Pro’s minimum load width is applied where it bites. Correct me with measured figures.
  12. ✓ confirmedRedundancy defaults off. Rental shows rarely run looped data; it is primarily a critical-installation feature. Turning it on doubles the runs (A+B loops).
  13. openHome runs cut at run distance + wall height + 5 m service loop.
  14. openProcessors are checked on two limits: port count and total pixel capacity (capacities placeholder).
  15. ✓ confirmedProcessor list defaults to Novastar (VX1000 first, UHD Jr / MCTRL / MX / VX family). Rental houses rarely run Brompton; it stays available for the shops that do. All figures verified against manufacturer spec sheets.
  16. openCases: 8 panels per dolly, 60 cables per trunk, 8 bumpers per case, rigging trunk per 6 points. Truck estimate: 0.5 m² footprint per case over 2.4 m trailer width.
  17. openElectronics spares: 1 receiving card per 25 panels, 1 PSU per 25, minimum 1 each.

Cable tags288 tags · 16 data runs · 8 circuits

One label per cable, both ends named, in the order the runs are wired: cabinets as column and row seen from the rear, c1r1 top left. Print them, or copy the list as CSV for a label printer.

Copy tags as CSV 🔒

The tag list, your own label format, and the CSV for a label printer are a Solo feature.

Planning aid. Rigging figures (points, loads, hardware) must be verified by a competent rigger before anything leaves the ground; panel and processor figures come from the manufacturers' datasheets and can change between revisions. Made with RigPlan, the free LED wall planner · rigplan.app

Other Esdlumen (LianTronics) panels

Compare with

How these numbers are derived: power and circuits, panels per data port, the pack list.