LEDitgo 496-1,2 MK2 V1 vs Unilumin UpanelS 1.2

1.292 mm against 1.27 mm · specifications from both manufacturers' datasheets

Side-by-side specifications, then the same wall built from each tile, so the comparison is in panels, kilograms, circuits and data runs rather than in marketing copy.

Specifications

	LEDitgo 496-1,2 MK2 V1	Unilumin UpanelS 1.2
Manufacturer	LEDitgo	Unilumin
Pixel pitch	1.292 mm	1.27 mm
Cabinet	496 × 496 mm	609.92 × 343.08 mm
Brightness	800 nits	600 nits
Refresh rate	3,840 Hz	3,840 Hz
Viewing angle	140° / 140°	160° / 160°
Pixels per cabinet	384 × 384	480 × 270
Pixels per m²	599,376	619,351
Weight	9.3 kg (38 kg/m²)	7.5 kg (36 kg/m²)
Max power	200 W (813 W/m²)	140 W (669 W/m²)
Typical power	48 W	46 W
Max hang	not published	20 panels

The same wall, built from eachclosest 16:9 / 16:10 near 8 m wide, flown, EU power, 60 Hz 8-bit

	LEDitgo 496-1,2 MK2 V1	Unilumin UpanelS 1.2
Wall built	16 × 9, 7.94 × 4.46 m	13 × 13, 7.93 × 4.46 m
Panels needed	144 + 8 spare	169 + 9 spare
Resolution	6,144 × 3,456 px	6,240 × 3,510 px
Weight incl. bumpers	1,539 kg	1,433 kg
Load per point	~616 kg across 3	~573 kg across 3
Power, full white	28.8 kW	23.7 kW
Circuits (16 A/230 V)	16	13
Data runs	48 at ≤3/port	52 at ≤4/port
Truck, linear	6.9 m	8.1 m

Whole cabinets rarely hit an identical size, so each wall is the closest build to a real video format (16:9 or 16:10) near 8 m wide for that tile: 7.94 × 4.46 m and 7.93 × 4.46 m respectively.

What the numbers say

Unilumin UpanelS 1.2 resolves finer: 619,351 pixels per square metre against 599,376 for LEDitgo 496-1,2 MK2 V1, 3% more. On a 8 m wide wall that is 6,240 px across versus 6,144 px.
Unilumin UpanelS 1.2 is the lighter rig: 36 kg/m² against 38 kg/m². Across this wall that is 106 kg of difference, 1,433 kg versus 1,539 kg, which moves point loads and can change the hoist call.
LEDitgo 496-1,2 MK2 V1 draws more: 813 W/m² against 669 W/m² at full white. For this wall that is 28.8 kW versus 23.7 kW, and 16 versus 13 circuits at a 16 A/230 V supply with an 80% derate.
Data is lighter on LEDitgo 496-1,2 MK2 V1: 48 runs against 52, at 3 and 4 panels per port respectively (60 Hz, 8-bit, ports loaded to 80%). Fewer runs means fewer home runs to pull and fewer processor ports to find.
Different cabinet formats: 496 × 496 mm against 609.92 × 343.08 mm, so 144 tiles versus 169 for the same wall. Fewer, larger cabinets build faster; smaller ones give finer control over wall dimensions and are easier to handle alone.
Estimated truck space: 6.9 m for LEDitgo 496-1,2 MK2 V1 against 8.1 m for the other, including spares, cases and cabling.

Comparing something else, or your own OEM tile? The comparison tool takes any panels, up to four at once, at your wall size. Add your own spec once in the calculator and it appears there alongside the catalogue.

Open these two in the tool

LEDitgo 496-1,2 MK2 V1 vs Unilumin UpanelS 1.2

Specifications

The same wall, built from eachclosest 16:9 / 16:10 near 8 m wide, flown, EU power, 60 Hz 8-bit

What the numbers say

Full specifications

Related comparisons