RigPlan.app

Hikvision DS-D4015CW-2F vs Philips (PPDS) 27HDL3015IP

1.5625 mm against 1.5625 mm · specifications from both manufacturers' datasheets

Side-by-side specifications, then the same wall built from each tile, so the comparison is in panels, kilograms, circuits and data runs rather than in marketing copy.

Specifications

Hikvision DS-D4015CW-2FPhilips (PPDS) 27HDL3015IP
ManufacturerHikvisionPhilips (PPDS)
Pixel pitch1.5625 mm1.5625 mm
Cabinet600 × 337.5 mm600 × 337.5 mm
Brightness600 nits600 nits
Refresh rate3,840 Hz3,840 Hz
Viewing angle160° / 160°160° / 160°
Pixels per cabinet384 × 216384 × 216
Pixels per m²409,600409,600
Weight3.4 kg (17 kg/m²)4 kg (20 kg/m²)
Max power79 W (390 W/m²)57 W (281 W/m²)
Typical power26 W19 W
Max hangnot publishednot published

The same wall, built from eachclosest 16:9 / 16:10 near 8 m wide, flown, EU power, 60 Hz 8-bit

Hikvision DS-D4015CW-2FPhilips (PPDS) 27HDL3015IP
Wall built13 × 13, 7.80 × 4.39 m13 × 13, 7.80 × 4.39 m
Panels needed169 + 9 spare169 + 9 spare
Resolution4,992 × 2,808 px4,992 × 2,808 px
Weight incl. bumpers740 kg841 kg
Load per point~296 kg across 3~336 kg across 3
Power, full white13.4 kW9.6 kW
Circuits (16 A/230 V)75
Data runs39 at ≤6/port39 at ≤6/port
Truck, linear7.5 m7.5 m

Whole cabinets rarely hit an identical size, so each wall is the closest build to a real video format (16:9 or 16:10) near 8 m wide for that tile: 7.80 × 4.39 m and 7.80 × 4.39 m respectively.

What the numbers say

Comparing something else, or your own OEM tile? The comparison tool takes any panels, up to four at once, at your wall size. Add your own spec once in the calculator and it appears there alongside the catalogue.

Open these two in the tool

Full specifications

Related comparisons