RigPlan.app

Absen SA2.6 500×500 vs YES TECH MG10 P2.6

2.6 mm against 2.6 mm · specifications from both manufacturers' datasheets

This page puts the two sheets side by side, then builds the same wall from each tile, so the comparison is in panels, kilograms, circuits and data runs.

Specifications

Absen SA2.6 500×500YES TECH MG10 P2.6
ManufacturerAbsenYES TECH
Pixel pitch2.6 mm2.6 mm
Cabinet500 × 500 mm500 × 500 mm
Brightness1,500 nits1,200 nits
Refresh rate7,680 Hz3,840 Hz
Viewing angle160° / 160°160° / 140°
Pixels per cabinet192 × 192192 × 192
Pixels per m²147,456147,456
Weight5.5 kg (22 kg/m²)6.6 kg (26 kg/m²)
Max power135 W (540 W/m²)140 W (560 W/m²)
Typical power45 W48 W
Max hang20 panelsnot published

The same wall, built from each closest 16:9 / 16:10 near 8 m wide, flown, EU power, 60 Hz 8-bit

Absen SA2.6 500×500YES TECH MG10 P2.6
Wall built16 × 9, 8.00 × 4.50 m16 × 9, 8.00 × 4.50 m
Panels needed144 + 8 spare144 + 8 spare
Resolution3,072 × 1,728 px3,072 × 1,728 px
Weight incl. bumpers992 kg1,150 kg
Load per point~397 kg across 3~460 kg across 3
Power, full white19.4 kW20.2 kW
Circuits (16 A/230 V)88
Data runs16 at ≤14/port16 at ≤14/port
Truck, linear6 m6 m

Whole cabinets rarely hit an identical size, so each wall is the closest build to a real video format (16:9 or 16:10) near 8 m wide for that tile: 8.00 × 4.50 m and 8.00 × 4.50 m respectively.

What the numbers say

For other panels, or your own OEM tile, the comparison tool takes any panels, up to four at once, at your wall size. Add your own spec once in the calculator and it appears there alongside the catalogue.

Open these two in the tool

Full specifications

Related comparisons