INFiLED vs PixelFLEX
4 matched panels · 5.95 to 8.33 mm · specifications from both makers' datasheets
The two lineups side by side, then what the matched panels say about weight, power and what each maker publishes. Every figure is the maker's own; the planner adds nothing it cannot point to on a sheet.
| INFiLED | PixelFLEX |
|---|
| Panels listed | 27 | 10 |
| Pitch range | 1.56 to 8.33 mm | 1.2 to 10 mm |
| Cabinet formats | 500×500, 500×1000, 1200×600, 1000×1000, 1200×1200 mm | 608×342, 500×500, 960×960 mm |
| Weight | 11 to 52 kg/m² | 30 to 40 kg/m² |
| Maximum draw | 458 to 720 W/m² | 452 to 1,200 W/m² |
| Brightness | 800 to 5,000 nits | 600 to 10,000 nits |
| Hang limit published | 7 of 27 | 0 of 10 |
| Typical draw published | 27 of 27 | 0 of 10 |
Weight and draw are per square metre of cabinet, so different cabinet sizes compare fairly. Ranges run across every panel the maker has in the database, not only the matched ones.
What the sheets say
- INFiLED and PixelFLEX overlap on 4 matched pairs between 5.95 and 8.33 mm; outside that band one of them has no comparable panel.
- INFiLED is the lighter cabinet in 4 of 4 matched pairs, PixelFLEX in 0. Across their lineups that is 11 to 52 kg/m² against 30 to 40 kg/m².
- INFiLED draws less at full white in 3 of 4 matched pairs, PixelFLEX in 1. Lineups: 458 to 720 W/m² against 452 to 1,200 W/m², which sets the circuit count.
- Cabinet formats: INFiLED builds in 500×500, 500×1000, 1200×600, 1000×1000, 1200×1200 mm; PixelFLEX in 608×342, 500×500, 960×960 mm. A shop that already owns one format keeps its bumpers and cases.
- A hanging limit is published for 7 of its 27 panels by INFiLED and for none of its 10 panels by PixelFLEX; where it is not, the planner uses a conservative placeholder and says so.
- Typical draw is estimated as a third of the maximum where a sheet publishes no figure: INFiLED for none, PixelFLEX for 10 of 10.
Matched panels, side by side
Each pair is two panels of comparable pitch, one from each maker, with the same wall built from both.
More