RigPlan

INFiLED ORAM8.3mk2 vs PixelFLEX FLEXStorm Pro 8

8.33 mm against 8 mm · specifications from both manufacturers' datasheets

Side-by-side specifications, then the same wall built from each tile, so the comparison is in panels, kilograms, circuits and data runs rather than in marketing copy.

Specifications

INFiLED ORAM8.3mk2PixelFLEX FLEXStorm Pro 8
ManufacturerINFiLEDPixelFLEX
Pixel pitch8.33 mm8 mm
Cabinet1200 × 1200 mm960 × 960 mm
Brightness3,500 nits10,000 nits
Refresh rate3,840 Hz3,840 Hz
Viewing angle160° / 160°160° / 90°
Pixels per cabinet144 × 144120 × 120
Pixels per m²14,40015,625
Weight15.5 kg (11 kg/m²)28 kg (30 kg/m²)
Max power660 W (458 W/m²)553 W (600 W/m²)
Typical power220 W184 W*
Max hangnot publishednot published

* Average draw estimated as max ÷ 3; this manufacturer publishes no average figure.

The same wall, built from eachclosest 16:9 / 16:10 near 8 m wide, flown, EU power, 60 Hz 8-bit

INFiLED ORAM8.3mk2PixelFLEX FLEXStorm Pro 8
Wall built8 × 5, 9.60 × 6.00 m8 × 5, 7.68 × 4.80 m
Panels needed40 + 2 spare40 + 2 spare
Resolution1,152 × 720 px960 × 600 px
Weight incl. bumpers720 kg1,220 kg
Load per point~216 kg across 4~488 kg across 3
Power, full white26.4 kW22.1 kW
Circuits (16 A/230 V)108
Data runs2 at ≤25/port2 at ≤36/port
Truck, linear3.3 m3.3 m

Whole cabinets rarely hit an identical size, so each wall is the closest build to a real video format (16:9 or 16:10) near 8 m wide for that tile: 9.60 × 6.00 m and 7.68 × 4.80 m respectively.

What the numbers say

Comparing something else, or your own OEM tile? The comparison tool takes any panels, up to four at once, at your wall size. Add your own spec once in the calculator and it appears there alongside the catalogue.

Open these two in the tool

Full specifications

Related comparisons