RigPlan

Absen PL4.8 Pro V10 vs ADJ AV4IP

4.8 mm against 4.81 mm · specifications from both manufacturers' datasheets

Side-by-side specifications, then the same wall built from each tile, so the comparison is in panels, kilograms, circuits and data runs rather than in marketing copy.

Specifications

Absen PL4.8 Pro V10ADJ AV4IP
ManufacturerAbsenADJ
Pixel pitch4.8 mm4.81 mm
Cabinet500 × 500 mm500 × 500 mm
Brightness4,500 nits4,000 nits
Refresh rate3,840 Hz1,920 Hz
Viewing angle140° / 80°not published
Pixels per cabinet104 × 104104 × 104
Pixels per m²43,26443,264
Weight8.1 kg (32 kg/m²)9 kg (36 kg/m²)
Max power180 W (720 W/m²)180 W (720 W/m²)
Typical power60 W60 W
Max hang20 panels15 panels

The same wall, built from eachclosest 16:9 / 16:10 near 8 m wide, flown, EU power, 60 Hz 8-bit

Absen PL4.8 Pro V10ADJ AV4IP
Wall built16 × 9, 8.00 × 4.50 m16 × 9, 8.00 × 4.50 m
Panels needed144 + 8 spare144 + 8 spare
Resolution1,664 × 936 px1,664 × 936 px
Weight incl. bumpers1,366 kg1,496 kg
Load per point~547 kg across 3~598 kg across 3
Power, full white25.9 kW25.9 kW
Circuits (16 A/230 V)99
Data runs4 at ≤48/port4 at ≤48/port
Truck, linear5.8 m5.8 m

Whole cabinets rarely hit an identical size, so each wall is the closest build to a real video format (16:9 or 16:10) near 8 m wide for that tile: 8.00 × 4.50 m and 8.00 × 4.50 m respectively.

What the numbers say

Comparing something else, or your own OEM tile? The comparison tool takes any panels, up to four at once, at your wall size. Add your own spec once in the calculator and it appears there alongside the catalogue.

Open these two in the tool

Full specifications

Related comparisons